Panasonic KX-TCD961EB Скачать руководство пользователя

Страница: 44 / 68

Direct Remote Operation

Once you have entered the remote code, you can also control your unit by direct commands instead of
using the voice menu. Hang up anytime to end the remote operation.

Direct commands

NEW MESSAGE PLAYBACK

•

Only new messages are played back.

ALL MESSAGE PLAYBACK

•

All messages are played back.

REPEAT (During playback)

•

The current message is repeated.

SKIP (During playback)

•

The current message is skipped. The
next message is played.

STOP (During playback)

•

Playback is temporarily stopped.

•

To resume playback, press
again within 15 seconds, or the voice
menu will start.

GREETING MESSAGE RECORDING

•

A series of short beeps will sound,
followed by a long beep.

•

Talk immediately after the long beep.

•

The recording is stopped.

•

The recorded message is played.

RECORD

ERASING A SPECIFIC MESSAGE
(During playback)

•

The current message is erased.

•

A short beep will sound and the
next message will be played.

ERASING ALL MESSAGES

•

All recorded messages are
erased.

•

A long beep sounds and “

message

” is heard.

ANSWERING SYSTEM OFF

•

“

Answer off

” is heard.

•

The unit hangs up and will not
answer calls until turned on again.

DISCONNECT

•

The call is terminated and
messages will be saved.

Turning on the answering system

Call your unit and wait for 20 rings.

Press the remote code within 10 seconds after the long beep.

•

The unit will answer and the greeting message will be played.

•

The answering system will turn on. Hang up or enter the remote code for other options.

•

When turning on the answering system using a rotary or pulse service telephone, you cannot
enter the remote code for other options.

•

If your remote code is not stored, you cannot turn on the answering system remotely.

Remote Operation from a Touch Tone Phone

KX-TCD961EB.4(38~46) 99.9.27 7:33 PM Page 44

Содержание KX-TCD961EB





































































Результаты поиска

Содержание KX-TCD961EB

Отзывы:

Похожие инструкции для KX-TCD961EB

Бренды по названию

Популярные бренды

Panasonic KX-TCD961EB, Руководство по эксплуатации

Результаты поиска

Содержание KX-TCD961EB

Отзывы:

Похожие инструкции для KX-TCD961EB

Бренды по названию

Популярные бренды