manualshive.com logo in svg

Panasonic KX-TCD961EB, Руководство по эксплуатации, Страница: 38 / 68

Поделиться
Скачать
Panasonic KX-TCD961EB Скачать руководство пользователя страница 38

38

When the unit answers a call, a greeting message is played and the caller’s message is recorded.

•

The total recording time (including the greeting message) is approximately 15 minutes. 

•

A maximum of 64 messages (including the greeting message) can be recorded.

Setting the Unit to Answer Calls

Press 

to turn on the answering system.

ANSWER ON

•

The indicator lights and “

Answer set

” is

heard.

•

The unit will announce the remaining
recording time if it is less than 5 minutes.

•

If you hear “

Memory is full

” and the

indicator flashes rapidly, erase some or all
of the messages (p. 40).

•

If you do not want the unit to answer calls, press 

again to turn off the answering

system. The indicator light goes out and “

Answer off

” is heard.

•

You can also turn on the answering system remotely using any other phone (p. 44).

Monitoring incoming calls

While a call is being recorded, you can monitor it through the speaker.
To answer the call, press 

. The unit stops recording.

ANSWER ON

Automatic Answering Operation

 Button and Indicator

ANSWER ON

KX-TCD961EB.4(38~46)  99.9.27 7:33 PM  Page 38

Содержание KX-TCD961EB





































































Отзывы:

Нет отзывов