Chapter 2
Cordless T
elephone (Basic Operations)
27
Special Features
How to Use the Pause Feature
(For Analogue PBX Line/Long Distance Service Users)
We recommend you press
if a pause is required for dialling with a PBX or to access a long
distance service.
Ex: Line access number
(PBX)
➡
➡
Phone number
•
Pressing
once creates a pause.
This prevents misdialling when you redial or dial a stored number.
•
Pressing
more than once increases the length of the pause between numbers.
RDL
RDL
RDL
9
9
RDL
1
Press
then
.
2
Press
.
3
Enter the base unit password (p. 31).
•
The factory preset is 0000.
4
Press
.
•
The current timing is displayed.
1: 3 seconds 2: 5 seconds
3
3
INT
PROG
5
To select 5 seconds, press
.
OR
To select 3 seconds, press
.
6
Press
.
•
A confirmation tone sounds and the
display will return to the stand-by mode.
PROG
1
2
Setting the pause timing
You can set the pause timing to 3 seconds or 5 seconds, depending on your PBX requirements. The
factory preset is 3 seconds.
Make sure that the power is ON (p. 14) and the unit is in the stand-by mode.
•
If 5 beeps sound in step 3, the entered
password is incorrect. Enter the correct
password.
Ex. 3 seconds is selected.
33
u
i
KX-TCD961EB.2(23~29) 99.9.27 7:36 PM Page 27
