manualshive.com logo in svg

Panasonic KX-TCD725EM, Руководство по эксплуатации

Поделиться
Скачать
Panasonic KX-TCD725EM Скачать руководство пользователя страница 69

69

Chapter 5

Answering System

To playback new
incoming/memo message(s)

1

Press 

(INT)

then 

.

2

Press

or

until the arrow points

to “

Play New Msg

”, then press

.

OR

Press

(4)

.

•

New incoming/memo message(s) is/are
played back from the speaker on the
handset if recorded.

•

The unit will announce the remaining
recording time after playback.

•

The display will return to “

Remote

Operation

”. To return to the standby

mode, press 

or wait for 30 seconds.

To playback all
incoming/memo message(s)

1

Press

(INT)

then

.

2

Press

or

until the arrow points

to “

Play All Msg

”, then press 

.

OR

Press

(5)

.

•

All incoming/memo message(s) is/are
played back from the speaker on the
handset if recorded.

•

The unit will announce the remaining
recording time after playback.

•

The display will return to “

Remote

Operation

”. To return to the standby

mode, press 

or wait for 30 seconds.

Incoming/Memo Message

Incoming messages and memo messages are stored in chronological order. New messages cannot be
recorded when “

Memory is Full

” is heard. We recommend you to erase unnecessary message after

each playback in order to leave more time for recording new incoming/memo message(s).

Make sure that the power is ON (p. 12), and the unit is in the standby mode.

1

During playback an/a incoming/memo
message, press 

.

2

Press 

or 

until the arrow points to

“

Erase One Msg

”, then press 

.

3

Press 

or 

to select “

Yes

”, then

press 

.

•

One incoming/memo message is erased. 

•

The display will return to “

Remote

Operation

”. To return to the standby

mode, press 

or wait for 30 seconds.

To erase one incoming/memo
message with function menu

1

During playback an/a incoming/memo
message, press 

.

2

Press 

then 

.

•

One incoming/memo message is erased.

•

The display will return to “

Remote

Operation

”. To return to the standby

mode, press 

or wait for 30

seconds.

4

To erase one incoming/memo
message with direct command

KX-TCD725EM-4(65~85)  01.7.19 10:23 PM  Page 69

Содержание KX-TCD725EM





































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды