manualshive.com logo in svg

Panasonic KX-TCD725EM, Руководство по эксплуатации

Поделиться
Скачать
Panasonic KX-TCD725EM Скачать руководство пользователя страница 44

44

Tone Option

Setting the Key Tone ON/OFF

You can choose whether or not the handset keys will sound (key tone, confirmation tone, error tone).
The factory preset is ON.
Make sure that the power is ON (p. 12), and the unit is in the standby mode.

5

Press 

or 

to select “

ON

” or “

OFF

”.

6

Press 

.

•

If ON is selected, a beep sounds.

•

The display will return to “

Key Tone

ON/OFF

”. To return to the standby mode,

press 

or wait for 60 seconds.

1

Press 

.

2

Press 

or 

until the arrow points

to “

Setting Handset

”, then press

.

3

Press 

or 

until the arrow points

to “

Tone Option

”, then press 

.

4

While “

Key Tone ON/OFF

” is at the

arrow, then press 

.

•

The current setting is at the arrow.

•

You can exit the programming mode any time
by pressing 

.

Setting the Call Waiting Tone ON/OFF

If an incoming call has been received during an intercom between handsets, a call waiting tone
sounds. The factory preset is ON.
Make sure that the power is ON (p. 12), and the unit is in the standby mode.

1

Press 

.

2

Press 

or 

until the arrow points to

“

Setting Handset

”

, then press 

.

3

Press 

or 

until the arrow points to

“

Tone Option

”

, press 

.

4

Press 

or 

until the arrow points to

“

Call Waiting

”

, then press 

.

•

The current setting is at the arrow.

5

Press 

or 

to select 

“

ON

” or

“

OFF

”

.

6

Press

.

•

A beep sounds.

•

The display will return to “

Call

Waiting

”. To return to the standby

mode, press 

or wait for 60

seconds.

•

You can exit the programming mode any time
by pressing 

.

KX-TCD725EM-3(38~64)  01.7.19 10:42 PM  Page 44

Содержание KX-TCD725EM





































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды