manualshive.com logo in svg

Panasonic KX-NS1000, Руководство по эксплуатации

Поделиться
Скачать
Panasonic KX-NS1000 Скачать руководство пользователя страница 306

Item

Description

Auto Forwarding Delay Time

Specifies the length of time in hours and minutes that the system waits
before forwarding unplayed messages.
The maximum delay time is 99 h, 59 min.

Note

The delay time must be shorter than the New Message Retention
Time, or else messages will be deleted before being forwarded.

Auto Forwarding Message
Type

Specifies whether all messages, or only voice messages or only fax
messages are forwarded.

Auto Forwarding Message
Type Urgent

Specifies whether only urgent messages are forwarded.

Auto Forwarding Mode

Specifies if forwarded messages are to be retained in the original
mailbox. When set to "Copy", copies of the messages are retained in
the original mailbox after forwarding. When set to "Move", messages
are forwarded to the receiving mailbox and are not retained in the
original mailbox.

Auto Forwarding Mode -
Message Remains New

Specifies if the forwarded messages remain marked as new.
This setting is available only when 

Auto Forwarding Mode

 is set to

"Copy".

Auto Forwarding Expires

Specifies the date and time of day for when forwarding of messages will
expire.

3.2.1 User Programming

306

Operating Manual

Содержание KX-NS1000















































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды