manualshive.com logo in svg

Panasonic KX-NS1000, Руководство по эксплуатации

Поделиться
Скачать
Panasonic KX-NS1000 Скачать руководство пользователя страница 142

•

Personal Group Distribution List number or Mailbox Group number (specifies a group of recipients for
Message Delivery).

•

Extension number or telephone number (specifies an individual recipient for External Message Delivery).

•

External Message Delivery List number (specifies a group of recipients for External Message Delivery).

 Message Delivery

You can send messages to other subscribers. You can specify message recipients either by number or by
subscriber name.
To specify the recipients by number:

•

Enter the subscriber’s mailbox number.

•

Enter a Personal Group Distribution List number (refer to " 

 Personal Group Distribution Lists").

•

Enter a Mailbox Group number (these must be created by the System Administrator. For more
information, consult your System Administrator).

To specify the recipients by name:

•

Enter the first few letters of the subscriber’s name (Dialling by Name feature).

 
Once you have specified the recipients, you can record a message. Before sending your message, you can
set any of the following:

•

Urgent Status:

The message will be heard before other messages by the recipient.

•

Private Status:

The recipient will not be able to forward the message, ensuring privacy.

•

Auto Receipt:

You will receive notification once the recipient has played back the message.

 
Finally, you can send your message immediately or set a message delivery time.

1.8.4 Sending Messages

142

Operating Manual

Содержание KX-NS1000















































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды