Panasonic KX-NCP500, Руководство пользователя

Страница: 202 / 376

When a pause is needed, pauses must be inserted manually (pressing the PAUSE button) in all cases, except
for the following access codes where a pause is automatically inserted between the user-dialed access code
and the subsequent digits:
a.
Host PBX Access code (
®
8.1.5 Host PBX Access Code (Access Code to the Telephone Company from
a Host PBX))
b.
Special Carrier Access code (
®
16.1.5 Special Carrier Access Code)
c.
Second Dial Tone Waiting code
Conditions
•
The length of a pause is programmable for each CO line.
•
Numbers stored in Memory Dialing can contain pauses.
•
When a Second Dial Tone Waiting code is dialed after seizing a CO line, a preprogrammed number of
pauses are inserted after the code.
•
ARS
A pause is not automatically inserted between the user-dialed access code and the subsequent digits when
the ARS mode is enabled. (
®
1.1.3 ARS (Automatic Route Selection))
PC Programming Manual References
3.28 [1-1] Slot—Port Property - LCO Port— Pause Time
3.34 [1-1] Slot—Port Property - T1 Port— Pause Time
4.5 [2-3] Timers & Counters—Miscellaneous— During Conversation—Pause Signal Time
8.4 [6-4] Second Dial Tone
PT Programming Manual References
[416] LCOT Pause Time
13.1.5 PC Console/PC Phone
Description
Panasonic PC Console/PC Phone is supported by a PC with a KX-DT343/KX-DT346 or KX-T7633/
KX-T7636 DPT (equipped with USB module) through USB ports. By using the KX-TDA0350 PC Phone or
KX-TDA0300 PC Console CTI application, users can enjoy many PBX features while utilizing the benefits of
a CTI solution. PC Console gives users access to certain administrative level features that are not available
with PC Phone.
202 Feature Manual Document Version 2009-12
13.1.5 PC Console/PC Phone