Panasonic KX-MB2001FR Скачать руководство пользователя страница 13

Страница: 13 / 88

Pull the paper input tray (

) until it clicks into place,

then pull it completely out, lifting the front part of the
tray.

Before loading a stack of paper, fan the paper to
prevent paper jams.

Load the paper, print-side up (

Important:

Push down to lock the plate (

) in the paper

input tray, if necessary.

Adjust the recording paper guides. Pinch the front
side of the recording paper guide (

), then slide it to

match the paper size mark. Pinch the right side of the
recording paper guide (

), then slide it to adjust the

width to the size of the recording paper.

Make sure that the recording paper is under the
paper limit mark (

), and the paper should not

be loaded over the snubbers (

Insert the paper input tray into the unit, lifting the front
part of the tray. Then push it completely into the unit.

Note:

If the paper is not loaded correctly, re-adjust the
paper guides, or the paper may jam.

If the paper input tray does not close, the plate in the
paper input tray may not be in the locked position.
Push the paper down and make sure that the paper
is laying flat in the paper input tray.

1. Introduction and Installation

Содержание KX-MB2001FR

























































































Результаты поиска

Содержание KX-MB2001FR

Отзывы:

Похожие инструкции для KX-MB2001FR

Бренды по названию

Популярные бренды

Panasonic KX-MB2001FR, Руководство по эксплуатации

Результаты поиска

Содержание KX-MB2001FR

Отзывы:

Похожие инструкции для KX-MB2001FR

Бренды по названию

Популярные бренды