Menu list
Problem
Cause/solution
The display is in a language I
cannot read.
R
Change the display language (page 13).
I cannot register a handset to a
hub.
R
The maximum number of handsets (6) is already
registered to the hub. Cancel unused handset
registrations from the hub (page 31).
R
You entered the wrong hub PIN. If you forget your PIN,
contact an authorised service centre.
Battery recharge
Problem
Cause/solution
The handset beeps and/or
blinks.
R
Battery charge is low. Fully charge the batteries (page 10).
I fully charged the batteries, but
–
still blinks,
– the operating time seems to
be shorter.
R
Clean the battery ends (
,
) and the charge contacts
with a dry cloth and charge again.
R
It is time to replace the batteries (page 10).
Making/answering calls, intercom
Problem
Cause/solution
is displayed.
R
The handset is too far from the hub. Move closer.
R
The hub’s AC adaptor is not properly connected.
Reconnect AC adaptor to the hub.
R
The handset is not registered to the hub. Register it
(page 31).
Noise is heard, sound cuts in
and out.
R
You are using the handset or hub in an area with high
electrical interference. Re-position the hub and use the
handset away from sources of interference.
R
Move closer to the hub.
R
If you use a DSL/ADSL service, we recommend
connecting a DSL/ADSL filter between the hub and the
telephone line jack. Contact your DSL/ADSL provider for
details.
Sound quality seems to be
getting worse.
R
You have registered a handset that is not recommended
(page 4). The clearest sound quality is only possible by
registering the recommended handset.
The handset does not ring.
R
The ringer volume is turned off. Adjust the ringer volume
(page 15, 25).
R
Night mode is turned on. Turn it off (page 28).
48
Useful Information
Содержание KX-HNH100FX
Страница 54: ...54 Notes ...
Страница 55: ...55 Notes ...