Panasonic KX-HNH100FX, Руководство по эксплуатации

Страница: 28 / 56

instructions in the System Setup Guide of
the hub.
1
M N#720
2
Select an alarm by pressing 1 to 3 . a
M OK N
3
MbN : Select the desired alarm option. a
M OK N
“ Off ”
Turns the alarm off. Go to step 9.
“
Once
”
The alarm sounds once at the set time.
“
Daily
”
The alarm sounds daily at the set time.
Go to step 5.
“
Weekly
”
Alarm sounds weekly at the set time(s).
4
Proceed with the operation according to
your selection in step 3.
n Once:
Enter the desired date and month. a
M OK N
n Weekly:
MbN : Select the desired day of the week
and press M N . a M OK N
5
Set the desired time. a M OK N
R You can select 24-hour or 12-hour
clock format (
“
AM
” or “
PM
” ) by
pressing * .
6
Enter a text memo (10 characters max.).
a M OK N
7
MbN : Select the desired alarm tone. a
M OK N
R We recommend selecting a different
ringer tone from the one used for
outside calls.
8
MbN : Select the desired snooze setting.
a M OK N
9
M OK N a MeN
Note:
R Press M N to stop the alarm completely.
R When the handset is in use, the alarm will
not sound until the handset is in standby
mode.
R Press any dial key or M N to stop the
sound but keep the snooze function
activated.
R If you want to make an outside call when
the snooze function is activated, please
stop the snooze function before making the
call.
Night mode
Night mode allows you to select a period of
time during which the handset will not ring for
outside calls. This feature is useful for time
periods when you do not want to be disturbed,
for example, while sleeping. Night mode can
be set for each unit.
Using the phonebook’s category feature
(page 19), you can also select categories of
callers whose calls override night mode and
ring the handset (Caller ID subscribers only).
Important:
R Make sure the unit’s date and time setting
is correct. The time setting of the system is
configured with the date and time of the
mobile device registered to the hub. If a
mobile device is not registered to the hub,
register it to the hub by following the
instructions in the System Setup Guide of
the hub.
R If you have set the handset alarm, the
alarm sounds even if the night mode is
turned on.
Turning night mode on/off
1
M N#238
2
MbN : Select the desired setting. a M OK N
R If you select “ Off ” , press MeN to
exit.
3
Enter the desired hour and minute you
wish to start this feature.
a M OK N
R You can select 24-hour or 12-hour
clock format (
“ AM ” or “ PM ” ) by
pressing * .
4
Enter the desired hour and minute you
wish to end this feature.
a M OK N
5
MeN
28
Programming