![background image](http://html1.mh-extra.com/html/panasonic/kx-hnc710w/kx-hnc710w_installation-manual_3793597015.webp)
charge in locations outside of
these temperatures.
Charge for about 7 hours.
R
Turn the camera off before
charging the battery. If the
camera is turned on while
charging, it may take longer to
charge.
1
Open the USB cover (
A
).
2
Insert the USB cable into the
micro-USB connector (
B
).
2
1
2
3
1
1
Power off
2
5.0 V, 1.0 A or higher power
source
We recommend using the
supplied USB cable.
3
Charging LED indicator
Note:
R
Check the charging LED
indicator continues to blink in
red for more than 10 seconds
after connecting the USB cable.
If the indicator stops blinking
and turns off within 10 seconds,
perform the following.
– If you are not using the
supplied USB cable, use it.
– If the indicator still turns off
within 10 seconds, try
connecting the USB cable to
a different power source
(5.0 V, 1.0 A or higher).
Charging LED
indicators
You can use the charging LED
indicators to confirm the charging
status of the camera.
Indicator
Status
Red, lit
Charging is
completed
Red, blinking
slowly
Charging
Red, blinking
quickly
Charging
failure
For assistance, please visit http://shop.panasonic.com/support
15
Setup
HNC710_(en_en)_0207_ver.110.pdf 15
2018/02/07 20:11:47
Содержание KX-HNC710W
Страница 26: ...26 Notes HNC710_ en_en _0207_ver 110 pdf 26 2018 02 07 20 11 47 ...
Страница 27: ...27 Notes HNC710_ en_en _0207_ver 110 pdf 27 2018 02 07 20 11 48 ...
Страница 43: ...15 Notas HNC710_ es_es _0208_ver 110 pdf 15 2018 02 08 20 45 11 ...
Страница 44: ...HNC710_ es_es _0208_ver 110 pdf 16 2018 02 08 20 45 11 ...