![background image](http://html1.mh-extra.com/html/panasonic/kx-hnc710w/kx-hnc710w_installation-manual_3793597014.webp)
LED indicator
Status
Green or amber, blinking
quickly - off for 1 second
Camera is on
Amber, lit
Not registered to the access point
, or
signal level is good
Green, lit
Registration successfully completed or
signal level is strong
Green, blinking quickly
Camera is searching for an access point
Red, lit
Registration failed, signal level is weak
,
or detecting motion
Red, blinking quickly
Streaming data
Amber, blinking slowly
Battery is running low
Green, blinking slowly
Registration mode, updating
Red, blinking slowly
Camera is out of range of the access
point
*1,
*1 You can configure the camera so that its LED indicator does not light
during normal operation. For more information, refer to the User’s
Guide (page 20).
*2 The LED indicator lights in amber for 5 seconds after the power is
turned on for the camera.
*3 The signal level (strong, good, weak, out of range) is shown after
pressing
M
SETUP
N
for 3 seconds.
Charging the
camera
R
This camera has an internal
rechargeable battery.
R
Remove the camera from the
wall before charging.
R
Make sure to charge the
camera indoors and in a dry
location.
R
Charge the camera in a location
with a temperature between
5 °C and 40 °C (41 °F and
104 °F). The camera cannot
14
For assistance, please visit http://shop.panasonic.com/support
Setup
HNC710_(en_en)_0207_ver.110.pdf 14
2018/02/07 20:11:47
Содержание KX-HNC710W
Страница 26: ...26 Notes HNC710_ en_en _0207_ver 110 pdf 26 2018 02 07 20 11 47 ...
Страница 27: ...27 Notes HNC710_ en_en _0207_ver 110 pdf 27 2018 02 07 20 11 48 ...
Страница 43: ...15 Notas HNC710_ es_es _0208_ver 110 pdf 15 2018 02 08 20 45 11 ...
Страница 44: ...HNC710_ es_es _0208_ver 110 pdf 16 2018 02 08 20 45 11 ...