Panasonic KX-FPG381 страница 89 Скачать руководство пользователя

Страница: 89 / 106

10. Help

For Fax Advantage assistance, call 1-800-435-7329.

The unit is not in TAM/FAX or FAX ONLY
mode. Select the desired mode using feature
#77 (page 73) and press

{

AUTO ANSWER

}

repeatedly until TAM/FAX or FAX ONLY
mode is displayed.

I cannot select the desired receiving mode.

If you want to set TAM/FAX or FAX ONLY
mode:
–

select the desired mode using feature #77
(page 73), and

–

press

{

AUTO ANSWER

}

repeatedly until

the desired mode is displayed.

If you want to set TEL mode:
–

press

{

AUTO ANSWER

}

repeatedly until

TEL mode is displayed.

10.3.6 Copying

The unit will not make a copy.

The film is empty. Replace the film with a new
one (page 14).

You cannot make a copy during
programming.

You cannot make a copy during a telephone
conversation.

A black line, white line or smudge appears on
the copied document.

The glass or rollers are dirty. Clean them
(page 90).

The copied image is distorted.

The thermal head is dirty. Clean it (page 91).

The printing quality is poor.

Please do not reuse the ink film!
Please use genuine Panasonic replacement
film. Refer to page 9 for further details.

Some paper has instructions recommending
which side to print on. Try turning the
recording paper over.

You may have used paper with a cotton
and/or fiber content that is over 20%, such as
letterhead or resume paper. We recommend
smooth paper such as “Hammermill Jet Print”
for clearer printing.

10.3.7 Answering machine

I cannot listen to messages from a remote
location.

Press the remote operation ID (code)
correctly and firmly (feature #11 on page 69,
or page 76).

If the unit announces

“Enter Mailbox

password.”

, mailbox 2 or 3 has a password.

Enter the password (feature #51 on page 71,
feature #52 on page 71, or page 76).

The unit is not in TAM/FAX mode. Change to
TAM/FAX mode (page 67).

Messages in the mailbox do not play back.

The mailbox password is wrong. Enter the
correct password.
–

For mailbox 2, see feature #51 on page
71, or page 76.

–

For mailbox 3, see feature #52 on page
71, or page 76.

The other party complains that they cannot
leave a voice message.

The recording time is set to “

GREETING

ONLY

”. Select “

1 MIN

”, “

2 MIN

” or “

3 MIN

”

(feature #10 on page 69, or page 75).

The memory is full. Erase unnecessary
messages (page 63, 65, 67).

I cannot operate the answering machine with
the handset.

Someone is operating the answering
machine.

You are too far from the base unit. Move
closer to the base unit.

During message playback, incoming call
tones are heard.

To answer the call, if you are using the base
unit, press

{

DIGITAL SP-PHONE

}

. If you are

using the handset, press

{

TALK

}

{

SP-

PHONE

}

. For playback, start again from the

beginning after hanging up.

I cannot erase messages in a mailbox.

While another user is accessing the mailbox
or a caller is leaving a message in the
mailbox, you cannot erase messages in the
same mailbox.

Caller ID information does not display during
message playback (page 65).

The caller information will not be displayed
–

if a message is recorded by using

{

MEMO

}

(page 62),

A B C

Original

Copy

0519_FPG381.book Page 87 Monday, May 19, 2003 6:46 PM

Содержание KX-FPG381











































































































Результаты поиска

Содержание KX-FPG381

Отзывы:

Похожие инструкции для KX-FPG381

Бренды по названию

Популярные бренды

Panasonic KX-FPG381, Руководство по эксплуатации

Результаты поиска

Содержание KX-FPG381

Отзывы:

Похожие инструкции для KX-FPG381

Бренды по названию

Популярные бренды