background image

10. Help

80

For Fax Advantage assistance, call 1-800-435-7329.

L

The recording paper was not fed into the unit 
properly (page 89). Reinstall paper (page 15) 
and press 

{

SET

}

 to clear the message.

L

The recording paper has jammed near the 
recording paper entrance. Clear the jammed 
paper (page 89) and press 

{

SET

}

 to clear the 

message.

COVER OPEN

b

CHECK FILM

L

The covers are open. Close them.

L

The film is empty. Replace the film with a new 
one (page 14).

L

The ink film is not installed. Install it (page 
13).

L

The ink film is slack or creased. Tighten it 
(see step 5 on page 13).

DENIED

L

When you tried to monitor an extension, the 
room monitor feature of the destination 
extension was set to OFF (page 48).

DIRECTORY FULL

L

There is no space to store new items in 
navigator directory. Erase unnecessary items 
(page 38).

L

The directory memory of the destination 
handset is already full, or became full when 
copying directory items. Copying was 
stopped. Press 

{

STOP

}

 to exit the mode 

(page 39). Erase other stored items in the 
destination handset directory (page 38), then 
try again.

ERROR!!

L

A handset tried to copy directory items (page 
39) but the copy has been stopped.

FAX IN MEMORY

L

The unit has a document in memory. See the 
other displayed message instructions to print 
out the document.

FAX MEMORY FULL

L

The memory is full of received documents 
due to a lack of recording paper or a 
recording paper jam. Install paper (page 15) 
or clear the jammed paper (page 88).

L

When performing memory transmission, the 
document being stored exceeded the 

memory capacity of the unit. Transmit the 
entire document manually.

FILM EMPTY

b

COVER OPEN

L

The film is empty. Replace the film with a new 
one (page 14).

L

The ink film is slack or creased. Tighten it 
(see step 5 on page 13) and install again.

L

The fax machine is positioned near 
appliances such as TVs or speakers which 
generate an intense magnetic field.

FILM NEAR EMPTY

L

The remaining film is low. Prepare a new film 
(page 9).

INCOMPLETE

L

The directory copy stopped because the 
destination handset was out of range.

INVALID

L

The called handset has not been registered 
to the base unit.

L

You pressed 

{

9

}

 instead of entering an 

extension number. Enter the extension 
number (

{

0

}

 to 

{

8

}

).

MEMORY FULL

L

When making a copy, the document being 
stored exceeded the memory capacity of the 
unit. Press 

{

STOP

}

 to clear the message. 

Divide the document into sections.

MODEM ERROR

L

There is something wrong with the unit. 
Contact our service personnel.

NO FAX REPLY

L

The other party’s fax machine is busy or has 
run out of recording paper. Try again.

NO ITEMS STORED

0519_FPG381.book  Page 80  Monday, May 19, 2003  6:46 PM

Содержание KX-FPG381











































































































Отзывы: