Panasonic KX-FP362BX, Руководство по обслуживанию

Страница: 50 / 196

Code Function Set Value Effective
Range
Default Remarks
853 Top margin 1~9 5 ----------
874 DTMFontime 060~200ms 060~200 090 ----------
875 DTMFofftime 060~200ms 060~200 085 ----------
880 History list See HISTORY (P.58).
881 Journal 2 list See PRINTOUT EXAMPLE (P.95).
882 Journal 3 list See PRINTOUT EXAMPLE (P.95).
6.3. TEST FUNCTIONS
The codes listed below can be used to perform simple checks of some of the unit’s functions. When complaints are received
from customers, they provide an effective tool for identifying the locations and causes of malfunctions. To do this, you set the
Service Mode (Refer to OPERATION (P.47)) first, then operate the below test items.
Test Mode Type of Mode Code Function
Operation after code
input
MOTOR TEST Service Mode “5” “5” “6” Rotates the transmission and reception motor to check the operation of the
motor.
12: Document feed
24: Recording paper is fed
Press [STOP] button to quit.
START
MODEM TEST Service Mode “5” “5” “4” Telephone line circuit is connected automatically, output the following signals on
the circuit line.
1)OFF 2)14400bps 3)12000bps 4)9600bps (V17) 5)7200bps(V17)
6)9600bps 7)7200bps 8)4800bps 9)2400bps 10)300bps 11)2100Hz
12)1100Hz
START
ROM CHECK Service Mode “5” “5” “1” Indicates the version and checks the sum of the ROM.
START
SCAN CHECK Service Mode “5” “5” “5” Turns on the LEDs of the CIS and operates the read systems.
START
LCD CHECK Service Mode “5” “5” “8” Checks the LCD indication.
Illuminates all the dots to check if they are normal.
START
DTMF SINGLE TEST Service Mode “5” “5” “2” Outputs the DTMF as single tones. Used to check the frequencies of the
individual DTMF tones. Refer to DTMF SINGLE TONE TRANSMIT SELECTION
(P.51).
1....ON
2....OFF
KEY CHECK Service Mode “5” “6” “1” Checks the button operation.
Indicates the button code on the LCD while the button is pressed. Refer to
BUTTON CODE TABLE (P.51).
START (any key)
MEMORY CLEAR Service Mode “5” “5” “0” To reset the value to the default one, except the top margin (#853), time/day
(#001), logo (#002), Fax ID(#003), History, Directory.
Please restart a power supply after clearing a memory.
START
LED CHECK Service Mode “5” “5” “7” All LEDs above the operation panel board flash on and off, or are illuminated.
START
DIGITAL
SPEAKERPHONE
RX & TX CHECK Service Mode “8” “4” “1” Please refer to DIGITAL SPEAKERPHONE (P.107).
SPEAKERPHONE
PRINT TEST
PATTERN Service Mode “8” “5” “2” Prints out the test pattern.
Used mainly at the factory to test the print quality.
You can select 1~4. (See PRINT TEST PATTERN (P.52))
START
50
KX-FP362BX