Panasonic KX-FP362BX, Руководство по обслуживанию

Страница: 22 / 196

4.1.2.1. MAINTENANCE LIST
NO. OPERATION CHECK REMARKS
1 Document Path Remove any foreign matter such as paper. —
2 Rollers If the roller is dirty, clean it with a damp cloth then dry
thoroughly. Refer to DOCUMENT FEEDER (P.27).
3 Platen Roller If the platen is dirty, clean it with a damp cloth then dry
thoroughly. Remove the paper and film cartridge before
cleaning. —
4 Thermal Head If the thermal head is dirty, clean the printing surface with a
cloth moistened with denatured alcohol (alcohol without
water), then dry thoroughly. Refer to THERMAL HEAD (P.28).
5 Sensors Hook switch (SW101), Paper top sensor (PS501), Film
end (SW501), Cover open switch (SW502), Document top
switch (SW353), Document set switch (SW352). Confirm
the operation of the sensors. See COMPONENT LOCATIONS (P.21) and
HOW TO REMOVE THE DIGITAL, ANALOG,
POWER SUPPLY, SENSOR BOARDS AND
AC INLET (P.41).
6 Glass If the glass is dirty, clean with a dry soft cloth. Refer to DOCUMENT FEEDER (P.27).
7 Abnormal, wear and tear
or loose parts Replace the part. Check if the screws are tight on all parts. —
4.1.2.2. MAINTENANCE CYCLE
No. Item Cleaning Cycle Replacement
Cycle Procedure
1 Separation Roller (Ref. No. 141) 3 months 7 years* (31,500 documents) Refer to HOW TO REMOVE THE MOTOR
BLOCK AND SEPARATION ROLLER
(P.42).
2 Separation Rubber (Ref. No. 11) 3 months 7 years (31,500 documents) Refer to COMPONENT LOCATIONS (P.21).
3 Feed Rollers (Ref. No. 9) 3 months 7 years (31,500 documents) Refer to DISASSEMBLY INSTRUCTIONS
(P.30).
4 Thermal Head (Ref. No. 95) 3 months 7 years (31,500 documents) Refer to HOW TO REMOVE THE
THERMAL HEAD (P.36).
5 Platen Roller (Ref. No. 54) 3 months 7 years (31,500 documents) Refer to HOW TO REMOVE THE PLATEN
ROLLER AND BACK COVER (P.37).
6 Pickup Roller (Ref. No. 46) 3 months 7 years (31,500 documents) Refer to HOW TO REMOVE THE PICKUP
ROLLER (P.38).
* These values are standard and may vary depending on usage conditions.
22
KX-FP362BX