Panasonic KX-FLM653EX, Руководство по эксплуатации

Страница: 64 / 86

8. Help
62
8.3.5 Copying
The printing quality is
poor.
L
If documents can be copied properly, the unit is working normally.
The other party may have sent a faint document or there may be
something wrong with the other party’s machine. Ask them to send
a clearer copy of the document or to check their fax machine.
L
Some paper has instructions recommending which side to print on.
Try turning the paper over.
L
You may have used paper with a cotton and/or fibre content that is
over 20%, such as letterhead or resume paper.
L
The remaining toner is low. Replace the toner cartridge (page 66).
L
To check the drum life and quality, please print the printer test list
(page 75). If printing quality is still poor, replace the toner cartridge
and drum unit.
L
The toner save mode is ON (feature #482 on page 52).
L
The glass or rollers are dirty with correction fluid, etc. Clean them
(page 73). Please do not insert a document before correction fluid
has dried completely.
I cannot receive
documents even though
paper is installed.
L
Feature #442 is activated and the received fax documents are
automatically transferred to the computer. View the received
documents using the computer (page 48).
When an extension
telephone is connected, I
cannot receive
documents by pressing
{*}{#}{
9
}
.
L
You must set remote fax activation to ON (feature #434 on page 55)
beforehand.
L
Press
{*}{#}{
9
}
firmly.
L
You may have changed the remote fax activation code from
{*}{#}{
9
}
(default setting). Verify the remote fax activation code
(feature #434 on page 55).
L
The memory is full of received documents due to a lack of
recording paper or a recording paper jam. Install paper (page 16)
or clear the jammed paper (page 69).
The other party complains
that they cannot send a
document.
L
The memory is full of received documents due to a lack of
recording paper or a recording paper jam. Install paper (page 16)
or clear the jammed paper (page 69).
L
The unit is not in FAX ONLY mode. Press
{
AUTO ANSWER
}
repeatedly to turn ON the
{
AUTO ANSWER
}
light.
I cannot select the desired
receiving mode.
L
If you want to set FAX ONLY mode:
–
press
{
AUTO ANSWER
}
repeatedly to turn ON the
{
AUTO
ANSWER
}
light.
L
If you want to set TEL mode or TEL/FAX mode:
–
select the desired mode using feature #404 (page 53), and
press
{
AUTO ANSWER
}
repeatedly to turn OFF the
{
AUTO
ANSWER
}
indicator.
Problem Cause & Solution
Problem Cause & Solution
The unit will not make a
copy.
L
You cannot make a copy during programming. Make the copy after
programming.
L
The document was not fed into the unit properly. Re-insert the
document.
L
Recording paper is not installed or the unit has run out of paper.
Install paper (page 16).
FLM653EX-PFQX2377ZA-en.book Page 62 Tuesday, December 20, 2005 8:55 AM