6. Multi-Function Station software
45
–
Labels that do not completely cover the
backing sheet as follows.
6.4.4 Envelopes
Use envelopes designed for laser printing. We
recommend the following:
–
High quality envelopes of 90 g/m
2
paper,
–
Envelopes that have thin, sharply creased
leading edges, and
–
Envelopes that have diagonal seams.
L
You can load 10 envelopes of 90 g/m
2
paper at a time for printing, print-side
down.
L
Insert envelopes, print-side down (
1
),
then adjust the recording paper guides
(
2
).
L
Remove each envelope after printing.
Note:
L
Wrinkles may occur in some cases, even if
high quality envelopes are used.
L
Avoid printing in high humidity, above 70%
relative humidity (RH). High humidity may
cause the envelope to curl, pick up excess
toner or seal the envelope.
L
Avoid printing below 10
°
C with less than
30% RH, or it may cause light printing.
L
Store envelopes away from moisture and
humidity, where they can lay flat and their
edges will not be bent or damaged. The
humidity should not exceed 70% RH.
Do not use envelopes with any of the
following characteristics (using these may
result in paper jams):
L
Irregularly shaped envelopes
L
Envelopes with curls, wrinkles, nicks, twists,
dog-ears or other damage
L
Envelopes with side seam construction
L
Highly textured envelopes, or envelopes with
extremely shiny surfaces
L
Envelopes that seal by removing a peel-off
strip
L
Envelopes with more than one flap to be
sealed
L
Self-adhesive envelopes
L
Envelopes that are baggy or not sharply
creased
L
Embossed envelopes
L
Envelopes that have previously been printed
on
L
Envelopes that include cotton and/or fibre
material
2
1
Side seam
construction
Peel-off strip
Multiple flaps
Twisted
Curled
Bent-edged
Waved
Dog-eared
Self adhesive
FLM653EX-PFQX2377ZA-en.book Page 45 Tuesday, December 20, 2005 8:55 AM
Содержание KX-FLM653EX
Страница 84: ...82 Notes ...
Страница 85: ...83 Notes ...