7. Fax
46
7.2 Sending a fax using one-
touch dial feature and navigator
directory
Before using this feature, store the desired names and
telephone numbers into one-touch dial feature and
navigator directory (page 42).
L
Make sure that the
{
FAX
}
light is ON.
7.2.1 Using the scanner glass
1
Set the original (page 22).
2
If necessary, change to the desired resolution (page
44) and the desired contrast (page 44).
3
Enter the fax number.
Using stations 1–7:
Press the desired station key.
Using stations 8–14:
Press
{
LOWER
}
, then press the desired station key.
Using navigator directory:
Press
{
DIRECTORY
}
, then press
{V}
or
{^}
repeatedly to display the desired item.
L
To send a single page, skip to step 6.
L
To send multiple pages, go to the next step.
4
Press
{
QUICK SCAN
}
to scan the document into
memory.
5
Place the next page.
i
{
SET
}
L
To send more pages, repeat this step.
6
{
START
}
Fax auto redial
If the line is busy or if there is no answer, the unit will
automatically redial the number 2 or more times.
Note:
L
To stop sending, see page 73.
7.2.2 Using the auto document feeder
1
Set the original (page 22).
2
If necessary, change to the desired resolution (page
44) and the desired contrast (page 44).
3
Enter the fax number using one-touch dial or
navigator directory.
4
{
START
}
7.3 Broadcast transmission
By storing one-touch dial and navigator directory items
(page 42) into the broadcast memory, you can send the
same document to multiple parties (up to 20). Your
programmed items will remain in the broadcast memory,
allowing frequent re-use.
L
The broadcast function utilises stations 1–3. The
one-touch dial function will be cancelled.
L
Make sure that the
{
FAX
}
light is ON.
7.3.1 Programming items into the
broadcast memory
1
Press
{
MENU
}
repeatedly to display
“
DIRECTORY
SET
”
.
2
Select the desired broadcast key.
For BROADCAST 1–2:
1.
{
BROADCAST
}
2.
Press
{V}
or
{^}
repeatedly to select
“
BROADCAST
”
.
For MANUAL BROADCAST (using the dial
keypad):
1.
{
MANUAL BROAD
}
2.
Press
{V}
or
{^}
repeatedly to select
“
MANUAL
BROAD
”
.
3
{
SET
}
4
Program items.
Using stations 1–7:
Press the desired station key.
Using stations 8–14:
Press
{
LOWER
}
, then press the desired station key.
Using navigator directory:
Press
{V}
or
{^}
repeatedly to display the desired
item.
i
{
SET
}
Using the dial keypad:
Enter the fax number.
i
{
SET
}
L
The number in brackets indicates the number of
registered items.
L
To program other items, repeat this step (up to 20
items).
L
If you have programmed the wrong item, press
{
STOP
}
to erase the item.
5
{
SET
}
L
To program another broadcast key, repeat steps
2 to 5.
6
{
STOP
}
7.3.2 Adding a new item into the broadcast
memory
1
{
DIRECTORY
}
FLB883FX-PFQX2770ZA-OI-en.book Page 46 Wednesday, September 26, 2007 10:41 AM
