7. Programmable Features
48
Setting friendly reception
{#}{
4
}{
6
}
To receive a fax automatically when you answer a call and hear a fax
calling tone (slow beep).
{
0
}
“
OFF
”
: You have to press
{
Start
}
for fax reception.
{
1
}
“
ON
”
(default): You do not have to press
{
Start
}
for fax reception.
Setting the auto
disconnection
{#}{
4
}{
9
}
To answer a call with an extension telephone in TEL/FAX mode (page 37),
activate this feature and program the code.
{
0
}
“
OFF
”
{
1
}
“
ON
”
(default)
1.
Press
{
Menu
}
.
2.
Press
{#}
, then
{
4
}{
9
}
.
3.
Press
{
1
}
to select
“
ON
”
.
4.
Press
{
Set
}
.
5.
Enter your code from 2 to 4 digits, using 0–9 and
{*}
.
L
The default code is
“
;
0
”
.
6.
Press
{
Set
}
.
7.
Press
{
Menu
}
.
Setting the scan contrast
{#}{
5
}{
8
}
To send or copy a document with faint or dark writing, set this feature
before transmission or copying.
{
1
}
“
NORMAL
”
(default): Used for normal writing.
{
2
}
“
LIGHT
”
: Used for dark writing.
{
3
}
“
DARKER
”
: Used for faint writing.
Note:
L
This feature is not available for photo and mixed resolution.
Setting the toner
maintenance time
{#}{
6
}{
5
}
The unit will automatically activate for maintenance, once every 24 hours.
Because this is to prevent the toner from solidifying, the noise that the unit
makes during maintenance cannot be stopped. However, if the unit’s noise
bothers you, you can change the start time.
1.
{
Menu
}
i
{#}{
6
}{
5
}
i
{
Set
}
2.
Enter the maintenance start time.
L
If you selected 12-hour time entry (page 20), the default time is
“
12:00PM
”
. Press
{*}
repeatedly to select AM or PM.
L
If you selected 24-hour time entry (page 20), the default time is
“
12:00
”
.
3.
{
Set
}
i
{
Menu
}
Setting the maximum fax
speed
{#}{
6
}{
6
}
{
1
}
“
14.4Kbps
”
{
2
}
“
33.6Kbps
”
(default)
Note:
L
The fax speed maybe lower than the selected speed according to your
line.
Setting the Error
Correction Mode (ECM)
{#}{
6
}{
8
}
This feature is available when the sending/receiving fax machines are
ECM compatible.
{
0
}
“
OFF
”
: Deactivates this feature.
{
1
}
“
ON
”
(default): If there is an error during fax transmission / reception,
the unit will support the communication.
Feature/Code
Selection
FL323HK-PNQX2241ZA-OI-en.book Page 48 Thursday, August 6, 2009 10:12 AM
