1. Introduction and Installation
12
Installation
1.5 Toner cartridge and drum unit
The supplied toner cartridge is a starter toner cartridge.
L
To replace the toner cartridge and the drum unit, see
page 58.
Caution:
L
Read the following instructions before you begin
installation. After you have read them, open the
drum unit protection bag. The drum unit contains
a photosensitive drum. Exposing it to light may
damage the drum. Once you have opened the
protection bag:
–
Do not expose the drum unit to light for more
than 5 minutes.
–
Do not touch or scratch the black drum
surface.
–
Do not place the drum unit near dust or dirt,
or in a high humidity area.
–
Do not expose the drum unit to direct
sunlight.
L
Do not leave the toner cartridge out of the
protection bag for a long time. It will decrease the
toner life.
1
Before opening the protection bag of the new toner
cartridge, shake it vertically more than 5 times.
2
Remove the toner cartridge and drum unit from the
protection bags. Peel off the seal (
1
) from the toner
cartridge.
L
Do not touch or scratch the black drum surface
(
2
).
3
Place the toner cartridge (
1
) into the drum unit (
2
)
vertically.
4
Press down the toner cartridge firmly (
1
). Keep
pressing while turning the lever on each side of the
toner cartridge towards you (
2
).
5
Make sure that the triangles (
1
) match, to install the
toner cartridge correctly.
1
2
1
2
1
1
2
2
1
FL323HK-PNQX2241ZA-OI-en.book Page 12 Thursday, August 6, 2009 10:12 AM