background image

CAUTION

Any changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate this product.

 

RF Exposure Warning

• This product complies with IC radiation exposure limits set forth for an uncontrolled

environment.

• To comply with IC RF exposure requirements, the product must be installed and

operated 20 cm (8 inches) or more between the product and all person’s body.

• This product may not be collocated or operated in conjunction with any other antenna

or transmitter.

1.2  For best performance

Repeater location/avoiding noise

The repeater and other compatible Panasonic products use radio waves to communicate
with each other.

• For maximum coverage and noise-free communications, place your repeater:

–at a convenient, high, and central location with no obstructions between the handset

and repeater in an indoor environment.

–away from electronic appliances such as TVs, radios, personal computers, wireless

devices, or other phones.

–facing away from radio frequency transmitters, such as external antennas of mobile

phone cell stations. (Avoid putting the repeater on a bay window or near a window.)

• Coverage and voice quality depends on the local environmental conditions.

• If the reception for a repeater location is not satisfactory, move the repeater to another

location for better reception.

Environment

• Keep the repeater away from electrical noise generating devices, such as fluorescent

lamps and motors.

• The repeater should be kept free from excessive smoke, dust, high temperature, and

vibration.

• The repeater should not be exposed to direct sunlight.

• Do not place heavy objects on top of the repeater.

• When you leave the repeater unused for a long period of time, unplug the repeater from

the AC outlet.

• The repeater should be kept away from heat sources such as radiators, cookers, etc. It

should not be placed in rooms where the temperature is less than 0 

 (32 

) or greater

than 40 

 (104 

). Damp basements should also be avoided.

1.2 For best performance

7

Содержание KX-A407 Series






























Отзывы: