O
N
O
F
F
1
2
3
4
5
6
7
8
1
..
..
..
8
6.
Repeater:
Plug the AC adaptor to reset the repeater.
7.
Base unit:
Press and hold the Handset locator button for about 4 seconds until the STATUS
indicator flashes red.
8.
Repeater:
When the repeater has found a repeater with the assigned ID, the STATUS indicator
will turn green.
Registration is complete.
9.
Base unit:
To exit registration mode, press the Handset locator button.
De-registration
Perform de-registration to delete the ID of the base unit/repeater that the repeater is
registered to.
1.
While pressing and holding down the PROGRAM button (page 11), turn on the
repeater by connecting the AC adaptor.
2.
Continue to hold down the PROGRAM button for 10 seconds.
When the STATUS indicator turns red, de-registration is complete.
3.
Release the PROGRAM button to reset the repeater.
3.4 Installation/Registering the Repeater
22
