manualshive.com logo in svg

Panasonic Jetwriter KX-P7305, Руководство пользователя, Страница: 270 / 277

Поделиться
Скачать
Panasonic Jetwriter KX-P7305 Скачать руководство пользователя страница 270

Settings and Printing

Network

Network

Maintenance and Spec.

Appendix

87

■

Trouble in Macintosh Environment

Unable to detect KX-P7310.

• Check that the KX-P7310 is connected to the network correctly.
• If the KX-P7310 is on the assigned zone, make sure the zone name is selected from 

"Chooser" .

• Make sure the correct printer driver is loaded.
• Ensure that AppleTalk is checked and is available from the Chooser.
• Check in the AppleTalk control panel that the correct environment being used.

NOTE

• Print out a Configuration page to ensure the AppleTalk protocol is ENABLED.
• Print out the Configuration page to ensure that an AppleTalk Printer name is assigned.

Shows "Not enough Memory" and unable to print.

• Application memory may not be enough. Click the application icon, select Information from 

file menu, and increase memory size.

• Close any other running applications.
• Increase the available space of the hard disk drive of your computer, by defragging.

Содержание Jetwriter KX-P7305






















































































































































































































































































Отзывы:

Нет отзывов