![background image](http://html.mh-extra.com/html/panasonic/ise-smart-connect-knx/ise-smart-connect-knx_product-manual_269597024.webp)
Commissioning and configuration
ISE SMART CONNECT KNX Panasonic
1-000C-000
© 2019 ise Individuelle Software und Elektronik GmbH
S. 24 / 69
8
Commissioning and configuration
After installing the device and connecting the bus, power supply and network, the device can be com
-
missioned.
8.1 Reading off the device status using the LEDs
The following status indicators (LEDs) can be found on the front panel.
Figure 15: Status indicators (LEDs) on the front of the device
Table 4: Status indicators
The "Programming" LED shows independently of the operating mode whether the device is in program
-
ming mode or not.
No.
Element
Description
1
"Programming" LED (red)
Programming mode active/inactive display
2
LED "APP" (green)
Serves as a status indicator for the application
3
LED "COM" (yellow)
KNX/TP communication traffic display