About this Documentation
ISE SMART CONNECT KNX Panasonic
1-000C-000
© 2019 ise Individuelle Software und Elektronik GmbH
S. 5 / 69
1
About this Documentation
This documentation will accompany you through all phases of the product life cycle of ISE SMART CON
-
NECT KNX Panasonic. You will learn for example how to assemble, install, commission and configure
the device.
All descriptions in this documentation relating to configuration in the ETS refer to the variant "ETS Pro
-
fessional" in the version 5.
Explanations for the concepts of KNX do not form part of this documentation.
1.1 Target group
This documentation is aimed at qualified electricians and KNX processors.
ISE SMART CONNECT KNX Panasonic may only be assembled and installed by qualified elec
-
tricians. Specialist knowledge of KNX is a prerequisite.
ISE SMART CONNECT KNX Panasonic may be configured by anyone. We recommend that
configuration is done by a system integrator with sound specialist knowledge of KNX and us
-
ing the ETS.
1.2 Symbols and typographical conventions
Table 1: Symbols and safety notes
Table 2: Special symbols and typographical conventions
Symbol / Label
Meaning
Warning of possible material damage
General warning
Warning of electrical voltage
Symbol / Label
Meaning
F1
PC button
<<Inscription>>
Text on software interface
Troubleshooting tip
Important additional information