Panasonic ISE SMART CONNECT KNX Скачать руководство пользователя страница 10 | Manualshive

Страница: 10 / 70

Panasonic ISE SMART CONNECT KNX Скачать руководство пользователя страница 10

Important notes

ISE SMART CONNECT KNX Panasonic

1-000C-000

© 2019 ise Individuelle Software und Elektronik GmbH

S. 10 / 69

3

Important notes

3.1 General safety instructions

3.2 Storage and transport

Store the device in its original packing. The original packing provides optimum protection during trans

-

port. Store the device in a temperature range of -25 °C to +70 °C.

3.3 Cleaning and maintenance

ISE SMART CONNECT KNX Panasonic is maintenance-free.

If necessary, clean the device with a dry cloth.

Warning

Danger from incorrect use

Incorrect use can result in damage to the device, fire or other dangers.

• Only qualified electricians may install and mount electrical devices.
• Follow the instructions in this product manual.
• This product manual is part of the product and must remain with the customer.

Important

Damage to the device due to incorrect opening

• Never open the housing.
• If you suspect that the device is damaged, contact our Support.
• We provide a warranty in accordance with statutory requirements.
• Please send the device back to us postage free with a detailed error description.

«
...
8
9
10
11
12
...
»

Содержание ISE SMART CONNECT KNX







































































Отзывы:

Нет отзывов