53
VQT3U98
∫
To set the White Balance in accordance to the recording scene
1
Fill the screen with a white subject.
2
Press the W.B. button to display Ach.
≥
When the operation icon is displayed and
is touched, it will switch to
. (
l
78)
3
Keep on pressing the W.B. button to start the White Balance adjustment.
≥
The screen goes dark momentarily, “WB SET OK” is displayed, and the adjustment ends.
≥
When the mode of White Balance is set to something other than Ach/Bch, the Black
Balance adjustment is performed by pressing and holding the W.B. button. Setting is
completed when the screen goes black momentarily and “BB SET OK” is displayed.
≥
When the White Balance/Black Balance cannot be performed, an error message
“WB SET NG” or “BB SET NG” is displayed on the screen. In such case, use other mode.
≥
The contents previously set are maintained in the Ach/Bch. Perform the setting again when
the recording condition has changed.
∫
To finely adjust the White Balance
White Balance for the Ach/Bch can be finely adjusted. Perform this after adjusting the White
Balance.
≥
Switch to Manual Mode. (
l
46)
1
Select the menu.
2
Touch
/
to adjust settings of color.
3
Touch [EXIT] to complete the setting.
: [CAMERA SETUP]
#
[COLOR TEMP A ch] or [COLOR TEMP B ch]
Ach
Bch
MENU
HDC-Z10000P-VQT3U98_mst.book 53 ページ ２０１１年１０月１７日 月曜日 午後２時２４分
