49
VQT3U98
∫
About the zoom speed
≥
The zoom speed will vary depending on how far the zoom lever is pressed or how fast the
zoom ring is rotated.
≥
Zoom speed of the sub zoom lever will vary depending on the setting of [SUB ZOOM].
(
l
126)
≥
The zoom speed does not vary when operating with the wireless remote control.
≥
If you take your finger off the zoom lever during zoom operation, the operation sound may
be recorded. When returning the zoom lever to the original position, move it quietly.
≥
It can be focused approximately 1.2 m (3.9 feet) or further when the zoom magnification is
at its maximum.
≥
It can be focused approximately 30 cm (0.98 feet) or further in 3D Recording Mode, and
approximately 3.5 cm (1.4
q
) or further in 2D Recording Mode when the zoom magnification
is set to 1
k
.
≥
The image may wiggle horizontally when zoomed during the 3D Recording Mode. This is
because the convergence point is controlled in combination with the zoom. It does not
indicate a fault.
≥
When switching to the [3D/2D REC MODE] setting, the zoom magnification will be set to
approximately 1
k
.
Utilizing the USER button
Digital zoom can be used by setting the USER button. (
l
71)
≥
Please refer to page 67 for details about setting the USER button.
HDC-Z10000P-VQT3U98_mst.book 49 ページ ２０１１年１０月１７日 月曜日 午後２時２４分
