Panasonic HDC-SDT750, Руководство по ремонту

Страница: 78 / 176

78
VQT3B18
When recording, the input level from the built-in microphones and the external microphone
terminal can be adjusted.
≥
Change the mode to .
≥
Switch to Manual Mode. (
l
86)
1 Select the menu.
≥
It is possible to select the setting from the quick menu in Manual Mode. (
l
41) The
microphone level returns to the setting adjusted previously, and it cannot be set from the
quick menu.
2
(When [SET
r
]/[SET] is selected)
Touch / to adjust the microphone input
level.
≥
Touch to activate/disactivate AGC.
When AGC is activated, the icon is surrounded by
yellow and the amount of sound distortion can be
reduced. When AGC is disactivated, natural recording
can be performed.
≥
Adjust the microphone input level so that the last
2 bars of the gain value are not red. (Otherwise, the
sound is distorted.) Select a lower setting for
microphone input level.
3 Touch [ENTER] to determine the microphone
input level and then touch [EXIT].
≥
(Microphone input level meter) appears
on the screen.
≥
When switching to Intelligent Auto Mode, the setting is fixed to [AUTO] and cannot be
changed.
≥
When [MIC SETUP] is [ZOOM MIC], the volume will be different depending on the zoom
rate.
≥
When [MIC SETUP] is set to [STEREO MIC] or external microphone input is used, the
sound is stereo (2 ch) and only the front-left and front-right input level meters function.
≥
The microphone input level meter shows the largest volume for the microphones.
≥
You cannot record with the audio completely muted.
[MIC LEVEL]
: [RECORD SETUP]
#
[MIC LEVEL]
#
desired setting
[AUTO]: AGC is activated, and the recording level is adjusted
automatically.
[SET
r
]/[SET]: The desired recording level can be set.
A Center
B Front left
C Back left
D
Front right
E
Back right
F Microphone input level
HDC-SDT750&TMT750-P-VQT3B18_mst.book 78 ページ ２０１０年８月２０日 金曜日 午後３時５３分