Panasonic HDC-SDT750 Скачать руководство пользователя страница 102

Страница: 102 / 176

102

VQT3B18

Deletes face recognition information from scenes in which faces were recognized.

≥

Change the mode to

and touch the play mode select icon to select [SD CARD]/

[1080/60p] or [SD CARD]/[AVCHD]. (

37).

Select the menu.

Touch the desired scenes with personal information to be deleted.

≥

appears at scenes for which faces were recognized. Touch one of the scenes where
appears.

≥

will change to

(red) when touched. Touch the

(red) again to cancel the

operation.

≥

Up to 99 scenes can be selected in succession.

Touch [Delete] or press the

button.

≥

To continuously delete other personal information, repeat steps 2-3.

≥

Press the MENU button to complete the settings.

When you stop deleting halfway

Touch [CANCEL] or press the MENU button while deleting personal information.

≥

The personal information that has already been deleted when the deletion is canceled
cannot be restored.

≥

During Disc Playback when connected to a DVD burner (optional), scenes/still pictures
cannot be deleted.

Scenes/still pictures can be protected so that they are not deleted by mistake.

(Even if you protect some scenes/still pictures, formatting the media will delete them.)

≥

Change the mode to

Select the menu.

Touch the scene/still picture to be protected.

≥

When touched, the scene/still picture is selected and the

indication appears on the

thumbnail. Touch the scene/still picture again to cancel the operation.

≥

Press the MENU button to complete the settings.

≥

When the disc playback is selected while a DVD burner (optional) is connected, scenes/
still pictures cannot be protected.

Deleting personal information

: [VIDEO SETUP]

[DELETE PERSONAL INFO]

Protecting scenes/still pictures

: [VIDEO SETUP] or [PICT. SETUP]

[SCENE PROTECT]

HDC-SDT750&TMT750-P-VQT3B18_mst.book 102 ページ２０１０年８月２０日　金曜日　午後３時５３分

Содержание HDC-SDT750

















































































































































































Результаты поиска

Содержание HDC-SDT750

Отзывы:

Бренды по названию

Популярные бренды

Panasonic HDC-SDT750, Руководство по ремонту

Результаты поиска

Содержание HDC-SDT750

Отзывы:

Бренды по названию

Популярные бренды