Panasonic HDC-SDT750, Руководство по ремонту

Страница: 44 / 176

44
VQT3B18
The unit is put into recording pause approx. 1 second when the unit is turned on with the
mode set to
or .
≥
Depending on the recording conditions, start time may be longer than 1 second.
≥
In the Quick power on mode, the zoom magnification becomes 1
k
.
This unit is put into recording pause approx. 0.6 seconds after the LCD monitor is reopened
or the viewfinder is extended.
≥
When in Quick start standby mode about 80% of the power used in Recording pause
mode is being consumed, so the recording time will be reduced.
≥
Quick start will not work if there is no SD card inserted.
≥
Change the mode to or .
1 Set [
QUICK START
] to [
ON
].
2 Close the LCD monitor and retract the
viewfinder while the mode is set to
or .
The status indicator A flashes green and the unit
goes into Quick start standby mode.
≥
The lens cover does not close.
3 Open the LCD monitor or extend
the viewfinder.
The status indicator A lights red and the unit
is put into recording pause.
≥
Quick Start Standby Mode is canceled if
j
about 5 minutes have elapsed
j
mode is set to
≥
Time for Quick start will be more than 0.6 seconds slower when the Digital cinema is used.
≥
Depending on the recording conditions, time for Quick Start may be more than 0.6 seconds
slower in Still Picture Recording Mode.
≥
It may take some time for Automatic white balance to adjust.
≥
In the Quick Start Mode, the zoom magnification becomes 1
k
.
≥
If [ECONOMY] (
l
43) is set to [5 MINUTES] and the unit automatically goes into Quick
Start Standby Mode, close the LCD monitor and viewfinder and then open the LCD monitor
or extend the viewfinder again.
≥
Turn the unit off using the power button.
≥
Quick start standby mode cannot be released by the remote control.
[QUICK POWER ON]
[OFF]/[ON]
[QUICK START]
[OFF]/[ON]
HDC-SDT750&TMT750-P-VQT3B18_mst.book 44 ページ ２０１０年８月２０日 金曜日 午後３時５３分