Panasonic HC-X909 Скачать руководство пользователя

Страница: 99 / 168

- 99 -

Dividing a scene (AVCHD)

It is possible to divide an AVCHD scene.
Any unwanted parts in the scene can be deleted after dividing.

≥

Change the mode to

and touch the play mode select icon. Then, select the

AVCHD scene. (

30)

Select the menu.

Touch the scene to be divided.

Touch

to set the dividing point.

≥

It is convenient to use Slow-motion Playback and Frame-
by-frame Playback. (

84)

≥

Touch [YES] to continue dividing the same scene. To
continue dividing other scenes, touch [NO] and repeat
Steps 2-3.

Touch [Return] to complete dividing.

≥

Unwanted parts can be deleted. (

96)

To delete all the divided points

≥

The scenes that were deleted after division cannot be recovered.

≥

You cannot divide a scene if you are playing back a disc with a DVD burner (optional)
connected, or if the number of scenes of a given date would exceed 99 scenes.

≥

It may not be possible to divide scenes with a short recording time.

≥

Data that has been recorded or edited on another device cannot be divided and the divided
points cannot be deleted.

≥

If personal information in the divided scenes is deleted, the personal information is deleted
when the divided scenes are cancelled.

: [EDIT SCENE]

[DIVIDE]

[SET]

: [EDIT SCENE]

[DIVIDE]

[CANCEL ALL]

MENU

0h00m15s

MENU

HC-X900&X900M&X800EP-VQT4D01_mst.book 99 ページ２０１２年１月１２日　木曜日　午前１０時４４分

Содержание HC-X909









































































































































































Результаты поиска

Содержание HC-X909

Отзывы:

Похожие инструкции для HC-X909

Бренды по названию

Популярные бренды

Panasonic HC-X909, Руководство по эксплуатации

Результаты поиска

Содержание HC-X909

Отзывы:

Похожие инструкции для HC-X909

Бренды по названию

Популярные бренды