Panasonic HC-X909 Скачать руководство пользователя

Страница: 101 / 168

- 101 -

Deleting personal information

Deletes Face Recognition information from scenes in which faces were recognised.

≥

Change the mode to

and touch the play mode select icon. Then, select the

AVCHD scene. (

30)

≥

Face Recognition information is not recorded in the scenes recorded in iFrame or
the scenes saved as MP4.

Select the menu.

Touch the desired scenes with personal information to be deleted.

≥

appears at scenes for which faces were recognised.

will change to

(red) when

touched. Touch the

(red) again to cancel the operation.

≥

Up to 99 scenes can be selected in succession.

Touch [Delete].

≥

To continuously delete other personal information, repeat Steps 2-3.

≥

Touch [Return] to complete the settings.

When you stop deleting halfway

Touch [CANCEL] while deleting personal information.

≥

The personal information that has already been deleted when the deletion is cancelled
cannot be restored.

≥

During Disc Playback when connected to a DVD burner (optional), personal information
cannot be deleted.

Protecting scenes/still pictures

Scenes/still pictures can be protected so that they are not deleted by mistake.

(Even if you protect some scenes/still pictures, formatting the media will delete them.)

≥

Change the mode to

Select the menu.

Touch the scene/still picture to be protected.

≥

When touched, the scene/still picture is selected and the

indication appears on the

thumbnail. Touch the scene/still picture again to cancel the operation.

≥

Touch [Return] to complete the settings.

≥

When the Disc Playback is selected while a DVD burner (optional) is connected, scenes/
still pictures cannot be protected.

: [VIDEO SETUP]

[DELETE PERSONAL INFO]

: [VIDEO SETUP] or [PHOTO SETUP]

[SCENE PROTECT]

MENU

HC-X900&X900M&X800EP-VQT4D01_mst.book 101 ページ２０１２年１月１２日　木曜日　午前１０時４４分

Содержание HC-X909









































































































































































Результаты поиска

Содержание HC-X909

Отзывы:

Похожие инструкции для HC-X909

Бренды по названию

Популярные бренды

Panasonic HC-X909, Руководство по эксплуатации

Результаты поиска

Содержание HC-X909

Отзывы:

Похожие инструкции для HC-X909

Бренды по названию

Популярные бренды