background image

- 2 -

About the recording format for 
recording motion pictures

You can select from AVCHD* or iFrame 
recording formats to record motion pictures 
using this unit. (

l

59)

* It is compatible with AVCHD 3D or AVCHD 

Progressive (1080/50p).

AVCHD 3D:

It is possible to record powerful, life-like 3D 
full high definition images.
A 3D compatible television compatible to the 
frame sequential format is required to view 
the 3D full high definition images. (

l

109, 

114)

AVCHD Progressive:

It is possible to record 2D image in the 
highest quality (1080/50p) for this unit.

iFrame:

This is a recording format suitable for 
viewing or editing on Mac (iMovie’11). Using 
iMovie’11, iFrame motion pictures can be 
imported faster than AVCHD motion 
pictures. Also, the imported file size of 
iFrame motion pictures will be smaller than 
that of AVCHD motion pictures.

It is not compatible with motion pictures 
recorded in AVCHD format.

Indemnity about recorded 
content

Panasonic does not accept any 
responsibility for damages directly or 
indirectly due to any type of problems that 
result in loss of recording or edited content, 
and does not guarantee any content if 
recording or editing does not work properly. 
Likewise, the above also applies in a case 
where any type of repair is made to the unit 
(including any other non-built-in memory 
related component).

Handling of built-in memory 
[HC-X900M]

This unit is equipped with the built-in 
memory. When using this component, pay 
attention to the following points.

Back up data periodically.

The built-in memory is temporary storage. In 
order to avoid erasing data due to static 
electricity, electromagnetic waves, 
breakage, and failures, back up the data to a 
PC or DVD disc. (

l

120, 134)

Access lamp [ACCESS] (

l

7) illuminates 

while the SD card or built-in memory is 
being accessed (initialization, recording, 
playback, deleting etc.). Do not perform the 
following operations when the lamp 
illuminates. It may damage the built-in 
memory or cause a malfunction in the unit.

j

Turn the unit off (remove the battery)

j

Insert and remove the USB cable

j

Expose the unit to vibrations or shock

About disposing of or giving away this unit. 
(

l

158)

Information for Your Safety

HC-X900&X900M&X800EP-VQT4D01_mst.book  2 ページ  2012年1月12日 木曜日 午前10時44分

Содержание HC-X909









































































































































































Отзывы: