- 59 -
≥
Peaking may not be displayed when you use Digital Zoom (
). To zoom in and use peaking at
the same time, we recommend increasing the magnification level of the magnified display by
setting [FOCUS ASSIST 1] to [BOTH] or by using the magnified display and the peaking function
in combination.
(Notes on the peaking of Focus Assist)
≥
When EVF/LCD detail is enabled, Focus Assist is canceled. (
)
(Notes on the magnified display of Focus Assist)
≥
Some information on the screen disappears when the screen is magnified.
≥
In the following cases, the screen is not magnified during Focus Assist:
j
During motion picture recording or PRE-REC (
)
j
When using Digital Zoom
j
When using Area Mode (
j
During auto recording (
)
j
During Super Slow Recording (
)
j
In Variable Frame Rate Mode (
j
During AG ROP application connection (
)
≥
If you set the magnification level of the magnified display to 5.5
k
or higher, peaking may not be
displayed when using i.Zoom (
Manual Focus Assist
Focus is automatically adjusted after you adjust it with the focus ring in Manual Focus Mode.
≥
Focus may not be achieved when the focus deviation is great.
≥
After automatic adjustment is complete, the focus is not adjusted automatically again until you
operate the focus ring.
≥
Switch to Manual Focus Mode. (
)
1
Select the menu.
≥
Touch [EXIT] to complete the setting.
≥
The on-screen icon changes from [MF] to [MA].
2
Adjust the focus by rotating the focus ring.
≥
Focus is automatically adjusted after you adjust it with the focus ring.
≥
The color of the on-screen icon for the focus value changes during automatic adjustment.
≥
This function is not available in the following cases:
j
When Auto Focus is used
j
During Super Slow Recording (
)
j
In Variable Frame Rate Mode (
≥
The on-screen icon changes to
in the macro range.
≥
Manual focus assist does not work in following cases:
j
When adjusting the focus with the remote control (commercially-available) (
: [SW SETUP]
#
[MF ASSIST]
#
[ON]
MENU
HC-X1_GD_DVQP1183ZA_eng.book 59 ページ 2016年11月28日 月曜日 午前11時44分