Panasonic HC-X1 Скачать руководство пользователя страница 206

Страница: 206 / 234

- 206 -

Major confirmation/error messages to be indicated on the screen in text.

Display

Messages

During recording/playback

Display

Description

Behavior and cause

CHECK CARD.

The SD card is not supported by this
unit.

≥

Check the SD card.

THIS CARD CANNOT
RECORD IN VIDEO
MODE.

This is displayed when the SD card
has a capacity of less than 4 GB.

≥

Use an SD card with a
capacity of 4 GB or more.

INCOMPATIBLE CARD.
CHECK CARD SPEED.

This is displayed if the maximum
writing speed of the SD card is not
fast enough.

≥

The operation will
continue.

≥

Use an SD card with a
maximum writing speed
that is fast enough.

CANNOT EDIT.

The SD card cannot be used with
this unit.

≥

Insert a recordable SD
card.

CANNOT BE USED DUE
TO INCOMPATIBLE
DATA.

Cannot be used due to
incompatible data. Use
another card.

CANNOT RECORD
- INCOMPATIBLE
CONTROL DATA.

The content versions do not match.
This is displayed when the SD card
contains scenes recorded with
another device, for example.

≥

Match the device and
content version.

REC STOPPED. NOW
WRITING.

This is displayed when the SD card
is removed during recording or data
cannot be written to the SD card
correctly.

≥

Check the SD card.

ERROR OCCURRED.
RECORDING IS
STOPPED.

ERROR OCCURRED.
PLEASE TURN UNIT OFF,
THEN TURN ON AGAIN.

This is displayed if the SD card is
removed or writing to the SD card
fails while recording is in progress.
It is also displayed when the lens of
the camera does not move.

≥

Check the SD card.

≥

Turn off and on this unit,
and then check to see if
the lens moves.

CANNOT RECORD.THE
NUMBER OF SCENES
HAS EXCEEDED THE
MAXIMUM LIMIT.

No additional scenes can be
recorded to the SD card.

≥

Delete unnecessary
scenes, or use a new SD
card.

HC-X1_GD_DVQP1183ZA_eng.book 206 ページ２０１６年１１月２８日　月曜日　午前１１時４４分

Содержание HC-X1











































































































































































































































Результаты поиска

Содержание HC-X1

Отзывы:

Похожие инструкции для HC-X1

Бренды по названию

Популярные бренды

Panasonic HC-X1, Руководство по эксплуатации

Результаты поиска

Содержание HC-X1

Отзывы:

Похожие инструкции для HC-X1

Бренды по названию

Популярные бренды