background image

- 7 -

Cautions for use

Keep this unit as far away as possible from 
electromagnetic equipment (such as 
microwave ovens, TVs, video games etc.).

If you use this unit on top of or near a TV, the 
pictures and/or sound on this unit may be 
disrupted by electromagnetic wave radiation.

Do not use this unit near cell phones because 
doing so may result in noise adversely 
affecting the pictures and/or sound.

Recorded data may be damaged, or pictures 
may be distorted, by strong magnetic fields 
created by speakers or large motors.

Electromagnetic wave radiation generated by 
microprocessors may adversely affect this 
unit, disturbing the pictures and/or sound.

If this unit is adversely affected by 
electromagnetic equipment and stops 
functioning properly, turn this unit off and 
remove the battery or disconnect AC adaptor. 
Then reinsert the battery or reconnect AC 
adaptor and turn this unit on.

Do not use this unit near radio transmitters 
or high-voltage lines.

If you record near radio transmitters or 
high-voltage lines, the recorded pictures and/
or sound may be adversely affected.

About using a headphone

Excessive sound pressure from earphones 
and headphones can cause hearing loss.

Listening at full volume for long periods may 
damage the user’s ears.

Make sure to use the supplied cords and 
cables. If you use optional accessories, use 
the cords and the cables supplied with 
them.
Do not extend the cords and the cables.

Do not spray insecticides or volatile 
chemicals onto the unit.

If the unit is sprayed with such chemicals, its 
body may be marred and the surface finish 
may peel off.

Do not leave rubber or plastic products in 
contact with the unit for a long time.

When you use the unit in a sandy or dusty 
place such as a beach, do not let sand or 
fine dust get into the body and terminals of 
the unit.
Also, keep the unit away from sea water.

Sand or dust may damage the unit. (Care 
should be taken when inserting and removing 
a card.)

If sea water splashes onto the unit, wipe off 
the water with a well wrung cloth. Then wipe 
the unit again with a dry cloth.

When carrying the unit, do not drop or bump 
it.

A strong impact can break the unit’s casing, 
causing it to malfunction.

When carrying this unit, please hold the 
handle, grip belt or shoulder strap firmly and 
treat it with care.

Cleaning

Before cleaning, detach the battery or pull the 
AC cable from the AC outlet, and then wipe 
the unit with a soft, dry cloth.

If the unit is very dirty, dip a cloth in water and 
squeeze firmly, and then wipe the unit with 
the damp cloth. Next, dry the unit with a dry 
cloth.

Use of benzine, paint thinner, alcohol, or 
dishwashing liquid may alter the camera body 
or peel the surface finish. Do not use these 
solvents.

When using a chemical dust cloth, follow the 
instructions that came with the cloth.

When you are not going to use the unit for 
an extended time

When storing the unit, it is recommended that 
you place a desiccant (silica gel) in with it.

About this unit

The unit and the SD card become warm 
during use. This is not a malfunction.

Содержание HC-MDH3

































































































































































Отзывы: