manualshive.com logo in svg

Panasonic GT01, Руководство пользователя

"NAiS GT01" - технический мануал для пользователя с подробными инструкциями по использованию продукта. Вы можете скачать его бесплатно с manualshive.com. Этот мануал поможет вам узнать все особенности "NAiS GT01" и как использовать его ваших нужд.

Поделиться
Скачать
background image

Safety Precautions 

Observe the following notices to ensure personal safety or to prevent accidents. 
To ensure that you use this product correctly, read this User’s Manual thoroughly before use. 
Make sure that you fully understand the product and information on safety. 
This manual uses two safety flags to indicate different levels of danger. 

WARNING   

If critical situations that could lead to user’s death or serious injury is assumed by 
mishandling of the product:

 

- Always take precautions to ensure the overall safety of your system, so that the whole 

system remains safe in the event of failure of this product or other external factor. 

- DO NOT USE THE PROGRAMMABLE DISPLAY TO CONTROL SAFETY FEATURES OR 

OTHER CRITICAL OPERATIONS OF EQUIPMENT OR SYSTEMS. A COMMUNICATION 
ERROR (FOR ANY REASON) MIGHT PREVENT SUCH SAFETY FEATURES OR 
CRITICAL OPERATIONS FROM FUNCTIONING PROPERLY. 

- Do not use this product in areas with inflammable gas. It could lead to an explosion. 
- Exposing this product to excessive heat or open flames could cause damage to the lithium 

battery or other electronic parts. 

- Battery may explode if mistreated. Do not recharge, disassemble or dispose of fire. 

CAUTION   

If critical situations that could lead to user’s injury or only property damage is 
assumed by mishandling of the product.

 

- To prevent excessive exothermic heat or smoke generation, use this product at the values 

less than the maximum of the characteristics and performance that are assured in these 
specifications. 

- Do not dismantle or remodel the product. It could cause excessive exothermic heat or smoke 

generation. 

- Do not touch the terminal while turning on electricity. It could lead to an electric shock. 
- Use the external devices to function the emergency stop and interlock circuit. 
- Connect the wires or connectors securely.   

The loose connection could cause excessive exothermic heat or smoke generation. 

- Do not allow foreign matters such as liquid, flammable materials, metals to go into the inside 

of the product. It could cause excessive exothermic heat or smoke generation. 

- Do not undertake construction (such as connection and disconnection) while the power 

supply is on. It could lead to an electric shock. 

- The control force of the touch switches should be less than the specification of the product. 

Failure to do so could lead to a damage to the product or a personal injury. 

- These touch switches operate using analog resistance membrane. Do not press more than 

one point on the screen at a time. Doing so might operate a switch located in the middle of 
the points pressed if one exists, and could lead to a damage to the facility or an accident. 

 

Copyright / Trademarks 

- This manual and its contents are copyrighted. 
- You may not copy this manual in whole or part, without written consent of Panasonic 

Industrial Devices SUNX Co., Ltd. 

- Windows is a registered trademark of Microsoft Corporation in the United States and other 

countries. 

- Ethernet is a registered trademark of Fuji Xerox Co., Ltd. and Xerox Corp. 
- SDHC logo and SD logo are trademarks. 
- All other company names and product names are trademarks or registered trademarks of 

their respective owners. 

POT_GT

 

Содержание GT01















































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для GT01

ABB FEPL-02 Ethernet POWERLINK Quick Installation And Start-Up Manual preview
FEPL-02 Ethernet POWERLINK
Бренд: ABB Страницы: 2
ABB FENA-01 Quick Installation And Start-Up Manual preview
FENA-01
Бренд: ABB Страницы: 2
Nelsen Corporation C Series Programming Manual preview
C Series
Бренд: Nelsen Corporation Страницы: 16
National Instruments C Series Getting Started preview
C Series
Бренд: National Instruments Страницы: 34
Salda TPC User Manual preview
TPC
Бренд: Salda Страницы: 16
Federal Signal Corporation FC Description, Specifications, Installation, Operation, And Service Manual preview
FC
Бренд: Federal Signal Corporation Страницы: 34
Garmin TR-1 Gold Installation Instructions preview
TR-1 Gold
Бренд: Garmin Страницы: 4
OJ Electronics EFR Series Instructions Manual preview
EFR Series
Бренд: OJ Electronics Страницы: 8
OJ Electronics ETO2 Manual preview
ETO2
Бренд: OJ Electronics Страницы: 112
OJ EFS Series Instructions Manual preview
EFS Series
Бренд: OJ Страницы: 17
Rain Bird ESP-LXD Installation, Programming & Operation Manual preview
ESP-LXD
Бренд: Rain Bird Страницы: 138
T&D TR7 Series Safety Precautions And Instructions preview
TR7 Series
Бренд: T&D Страницы: 2
T&S B-0107 Installation And Maintenance Instructions preview
B-0107
Бренд: T&S Страницы: 5
UNICORECOMM UM4B0 User Manual preview
UM4B0
Бренд: UNICORECOMM Страницы: 32
UNICORECOMM UM220-IV M0 Additional Instructions For Installation And Operation preview
UM220-IV M0
Бренд: UNICORECOMM Страницы: 7
UNICORECOMM UM220-INS NF Installation And Operation User Manual preview
UM220-INS NF
Бренд: UNICORECOMM Страницы: 26
UNICORECOMM UM220-INS NF User Manual preview
UM220-INS NF
Бренд: UNICORECOMM Страницы: 25
Union Instruments CWD2005 SPC Operating Instructions And Safety Notes preview
CWD2005 SPC
Бренд: Union Instruments Страницы: 63

Бренды по названию

Популярные бренды

Загрузить еще бренды