Panasonic GP-VD151A, Руководство по эксплуатации

Страница: 15 / 168

ENGLISH
14 (E)
Parts and their functions
p 
Camera unit
<Rear panel>
<Bottom panel>
1
Wireless remote controller signal light-sensing
area
Light sensors are located in two places at the front of the
camera pedestal.
2
Status display lamp
This lights in the following way depending on the status of
the unit.
Orange: When the standby status is established
Green: When the power is on
Red: When trouble has occurred in the unit
Green and blinks twice:
When a signal matched by the remote control
ID has been received from the wireless
remote controller (optional accessory) while
the power is on
Orange and blinks twice:
When a signal which is not matched by the
remote control ID has been received from
the wireless remote controller (optional
accessory) while the power is on
3
Camera head
This rotates in the horizontal direction.
4
Lens unit
This rotates in the up and down direction.
5
IR ID switches [IRID]
[CAM1] [CAM2]
These are used to select the ID of the wireless remote
controller (optional accessory).
The IR ID switch settings “CAM1” and “CAM2”
correspond to the [CAM1] and [CAM2] buttons on the
wireless remote controller.
6
HDMI connector [HDMI]
This is the HDMI video output connector.
7
Anti-theft wire mounting hole
Use this hole to attach the wire bracket.
8
Service connector
This connector is used only when maintenance is carried
out.
9
DC IN connector [12V IN ]
Connect the AC adapter supplied with the unit to this
connector to supply the DC 12 V voltage to the unit.