Panasonic FPSIGMA, Техническое руководство

Страница: 69 / 94

Programming Examples for FPWIN Pro
68
In the ladder diagram body you can see an instance of the FNS_ProfinetIO function block
called Profinet, and how the inputs, outputs and configuration data have to be supplied to the
function block.
5.8.1 FNS_ProfinetIO Function Block
The FNS_ProfinetIO function block configures the FP-FNS block ProfinetIO. It has to be
supplied with information about the configuration, the input and output size and
network-specific data.
If no inputs or no outputs are used, just leave the corresponding pins unconnected.
PLC types: available for FP2/FP2SH and FP

.
Variables of this function block have to be of one of the following data types:
Inputs
Input Data Type Function
bReset BOOL Reset pin; network block will be reset while bReset is set.
iSlotNo INT Installation position of the FNS unit
bSetStationName BOOL A rising edge of this input sets the string stored in sStationName
as the station's name and performs a power-up reset of the unit.
sStationName STRING The Station Name identifies the PROFINET IO unit in the
PROFINET network. If this value is set with bSetStationName
while the connection with the IO controller is established, the unit
will reset so changes can take effect. Changes made through
DCP will take immediate effect without reset.
pInputs POINTER Pointer to the input's process data table
pInConfig POINTER Pointer to the input's configuration data table
pOutputs POINTER Pointer to the output's process data table
pOutConfig POINTER Pointer to the output's configuration data table
iWatchdogTime_ms INT Watchdog timeout value for unit in ms. Valid values from 1 to
32767. 0: default of 700ms.