Panasonic FPSIGMA, Техническое руководство

Страница: 50 / 94

FNS_InitConfigDataTable Function
49
5.2 FNS_InitConfigDataTable Function
The FNS_InitConfigDataTable function creates a ConfigDataTable from the variable
ProcessDataTable . This ConfigDataTable is necessary to configure the FP-FNS block.

Make sure that the size of the variable ConfigDataTable corresponds to the
structure of the ProcessDataTable, e.g. if the ProcessDataTable consists of
three entries, then the
ConfigDataTable variable should be an "Array[0..2] of
WORD", whose size matches the number of entries. If the ProcessDataTable
variable has only one entry (e.g. WORD), then the ConfigDataTable variable
should be an "Array[0..0] of WORD" (with size 1).

Allowed data types for the input of the FNS_InitConfigDataTable are all 16-bit
(INT, WORD), 32-bit (DINT, DWORD, TIME (32 bits), REAL) and 64-bit
variables or arrays of them. 64-bit variables are defined as 2-dimensional
arrays, e.g. "Array[0..0,0..3] of INT" is a 64-bit variable, while "Array[0..3] of
INT" represents an array with four elements of 16-bit variables.

The data types BOOL, STRING and arrays of these types are NOT allowed at
the input of the function FNS_InitConfigDataTable.
The output ConfigDataTable of the function must be an array of WORD.
In the programming example, both variables ConfigIn and ConfigOut must have a size of
three to accommodate the three elements of the DUT's inputs and outputs.
If no inputs or no outputs are used, just omit the corresponding network when creating the
configuration data.