Panasonic FP-X0 L14R, Руководство пользователя

Страница: 253 / 290

14.3 Table of High-level Instructions
The high-level instructions are expressed by the prefixes “F” or “P” with numbers. For most of the high-level
instructions, “F” and “P” types are available. The differences between the two types are explained as follows:
- Instructions with the prefix “F” are executed in every scan while its trigger is in the on.
- Instructions with the prefix “P” are executed only when the leading edge of its trigger is detected.
For the FP0/FP0R/FP
Σ
/FP-X, the P type high-level instructions are not available.
Num-
ber
Name Boo-lean
Ope-
rand
Description
S
te
p
s
F
P
0/
FP
-e
FP
0
R
FP
Σ
FP
-X
FP
-X0
FP
2
F
P2
SH
/F
P1
0
SH
Data transfer instructions
F0
P0
16-bit data
move MV
PMV S, D (S)
→
(D)
5
F1
P1 32-bit data
move DMV
PDMV S, D (S+1, S)
→
(D+1, D)
7
F2
P2 16-bit data
invert and
move MV
PMV/ S, D
(S)
→
(D)
5
F3
P3 32-bit data
invert and
move DMV/
PDMV/ S, D
(S+1, S)
→
(D+1, D) 7
F4
P4 Reading of
head word No.
of the
specified slot GETS
PGETS S, D The head word No. of the specified slot is
read.
5
*1 *1
F5
P5 Bit data move BTM
PBTM
S, n, D The specified one bit in “S” is transferred to
the specified one bit in “D”. The bit is
specified by “n”.
7
F6
P6 Hexadecimal
digit (4-bit)
data move DGT
PDGT S, n, d The specified one digit in “S” is transferred
to the specified one digit in “D”. The digit is
specified by “n”.
7
F7
P7 Two 16-bit
data move MV2
PMV2 S1, S2,
D (S1)
→
(D),
(S2)
→
(D+1)
7
F8
P8 Two 32-bit
data move DMV2
PDMV2 S1, S2,
D (S1+1, S1)
→
(D+1, D),
(S2+1, S2)
→
(D+3, D+2)
11
F10
P10 Block move BKMV
PBKMV S1, S2,
D The data between “S1” and “S2” is
transferred to the area starting at “D”.
7
F11
P11 Block copy COPY
PCOPY S, D1,
D2 The data of “S” is transferred to the all area
between “D1” and “D2”.
7
F12 Data read from
EEP-ROM ICRD S1, S2,
D The data stored in the expansion memory
of the EEP-ROM specified by “S1” and “S2”
are transferred to the area starting at “D”.
11
*2
P13 Data write to
EEP-ROM PICWT S1, S2,
D The data specified by “S1” and “S2” are
transferred to the EEP-ROM starting at “D”.
11
*2
F12 Data read from
F-ROM ICRD S1, S2,
D The data stored in the expansion memory
of the F-ROM specified by “S1” and “S2”
are transferred to the area starting at “D”.
11
P13 Data write to
F-ROM PICWT S1, S2,
D The data specified by “S1” and “S2” are
transferred to the F-ROM starting at “D”.
11
F12
P12 Data read from
IC card ICRD
PICRD S1, S2,
D The data stored in the expansion memory
of the IC card specified by “S1” and “S2”
are transferred to the area starting at “D”.
11
F13
P13 Data write to
IC card ICWT
PICWT S1, S2,
D The data specified by “S1” and “S2” are
transferred to the IC card expansion
memory area starting at “D”.
11
F14
P14 Program read
from IC
memory card PGRD
PPGRD S The program specified using “S” is
transferred into the CPU from IC memory
card and executes it.
3
: Available, : Not available, : Not available partially
*1) This instruction is available for FP2/FP2SH Ver. 1.5 or later.FP10SH cannot be used
*2) This instruction is available for FP0 Ver. 2.0 or later and FP-e.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com