Panasonic FP-X0 L14R, Руководство пользователя

Страница: 271 / 290

Num-
ber
Name Boolean
Ope-
rand
Description
S
te
p
s
F
P
0/
FP
-e
FP
0
R
FP
Σ
FP
-X
FP
-X0
FP
2
F
P2
SH
/F
P1
0
SH
F347
P347 Floating-point
type data
upper and
lower limit
control FLIMT
PFLIMT S1, S2,
S3, D When (S1+1, S1)>(S3+1, S3),
(S1+1, S1)
→
(D+1, D)
When (S2+1, S2)<(S3+1, S3),
(S2+1, S2)
→
(D+1, D)
When (S1+1, S1)<or = (S3+1,
S3)<or =(S2+1, S2), (S3+1,
S3)
→
(D+1, D)
17
F348
P348 Floating-point
type data
dead-band
control FBAND
PFBAND S1, S2,
S3, D When (S1+1, S1)>(S3+1, S3),
(S3+1, S3)
−
(S1+1, S1)
→
(D+1, D)
When (S2+1, S2)<(S3+1, S3),
(S3+1, S3)
−
(S2+1, S2)
→
(D+1, D)
When (S1+1, S1)<or = (S3+1,
S3)<or =(S2+1, S2), 0.0
→
(D+1, D)
17
F349
P349 Floating-point
type data zone
control FZONE
PFZONE S1, S2,
S3, D When (S3+1, S3)<0.0,
(S3+1, S3)+(S1+1, S1)
→
(D+1, D)
When (S3+1, S3)=0.0, 0.0
→
(D+1,
D)
When (S3+1, S3)>0.0, (S3+1,
S3)+(S2+1, S2)
→
(D+1, D)
17
F350
P350 Floating-point
type data maxi-
mum value FMAX
PFMAX S1, S2,
D Searches the maximum value in the
real number data table between the
area selected with “S1” and “S2”,
and stores it in the (D+1, D). The
address relative to “S1” is stored in
(D+2).
8
F351
P351 Floating-point
type data mini-
mum value FMIN
PFMIN S1, S2,
D Searches the minimum value in the
real number data table between the
area selected with “S1” and “S2”,
and stores it in the (D+1, D). The
address relative to “S1” is stored in
(D+2).
8
F352
P352 Floating-point
type data total
and mean
values FMEAN
PFMEAN S1, S2,
D The total value and the mean value
of the real number data from the
area selected with “S1” to “S2” are
obtained. The total value is stored in
the (D+1, D) and the mean value is
stored in the (D+3, D+2).
8
F353
P353 Floating-point
type data sort FSORT
PFSORT S1, S2,
S3 The real number data from the area
specified by “S1” to “S2” are stored
in ascending order (the smallest
word is first) or descending order
(the largest word is first).
8
F354
P354 Scaling of real
number data FSCAL
PFSCAL S1, S2,
D Scaling (linearization) on a real
number data table is performed, and
the output (Y) to an input value (X) is
calculated.
12 *1 *2 *3 *3
: Available, : Not available, : Not available partially
*1) This instruction is available for FP
Σ
32k type.
*2) This instruction is available for FP-X Ver. 1.13 or later.
*3) This instruction is available for FP2/FP2SH Ver. 1.5 or later. FP10SH cannot be used.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com