Panasonic F-VXR70H, Руководство по эксплуатации

Страница: 9 / 52

VXR70H
9
Confirmation and
preparation
3
Install the front panel.
* Be sure to attach the front
panel before use.
Fill the tank with water Turn on
5
Connect the power
plug.
(Wipe the water off the
power plug and your
hands before inserting it.)
●
Inserting the power plug turns on
the “Humidity indicator” (P.7).
Displaying the general level of
the current humidity.
●
Press , and the “Clean
sign” (P.7) blinks blue or red for
about 5 seconds. The odor sensor
takes this moment as the baseline
for the level of cleanliness, so it is
recommended when the air in the
room is clean (such as when there
is no cigarette smoke).
(The odor sensor baseline is updated
automatically depending on the level
of cleanliness in the room.)
4
Remove the tank, fill
it with water, and
install it back.
(Not required when
humidification is not used.)
●
Be sure to disconnect the
power plug before water
supply the product.
1
Press the hook to remove the tank,
and remove the cap.
Press the
hook.
Tank
Flip the tank upside down when filling
with water or returning the tank.
Cap
2
Fill with water.
The tank can be supported
using the tank stand.
(Rotate the tank stand.)
Guide of full
capacity
3
Firmly tighten the cap.
●
Hold the tank firmly to
prevent it from toppling over.
4
Return the tank to the product.
Press until the
tank makes a
“clicking” sound.
■
Be sure to use the tap water
(This is because tap water is normally
chlorine-disinfected to prevent
breeding of bacteria.)
●
Do not use the following water:
●
Warm water that is 40 °C or more,
or water that contains detergent.
(Otherwise, deformation or failure
may occur.)
●
Water mixed with chemicals, air
fresheners, or essential oil.
(It may damage the tank and cause
spillage or wet the furniture. → P. 4)
●
Water from water purifier, ionized
alkaline water and well water.
(It may cause mold or bacteria.)
Attention
●
If you have to use the well water
(drinkable), please maintain and clean
the tray, the humidifying filter set, the
anti-fungus assembly more frequently.
■
Continuous operation time of a
tank of water
●
Operates for about 4.6 hours.
(When the product is operating with
“Air volume” set to [H (High)], and
the room temperature is 20 °C and
humidity is 30%)