Panasonic F-VXR70H, Руководство по эксплуатации

Страница: 16 / 52

Body, Front panel
<about once a month>
Anti-fungus assembly
<about once a month
*
1
>
Tank
<every day>
Tray
<about once a month
*
1
>
16
Care and maintenance
(continued)
●
Do not use the detergents or
other substances on the right.
●
You can use the oxygen-based
bleaching agent only when
cleaning the humidifying filter.
●
When using chemically treated
cloth, follow its instructions.
Front panel
Shaft mount:
thin
Floater
Anti-fungus assembly
Humidifying filter set
●
Remove the tank, and
pull out the tray.
*1 As the dirtiness varies depending on the water quality, maintenance may be required even within one month
after the last maintenance. If it smells unpleasant or water in the tank decreases less than before, clean the tank.
Wipe with a soft wrung cloth.
( Installation and removal→P.8)
Wiping with hard cloth may scratch the surface.
●
Wipe the power plug with dry cloth.
Soaking.
●
See “To remove the stubborn stains”. (P.17)
●
Do not scrub with a brush or disassemble
the anti-fungus assembly.
●
Install it into the tray groove so that it is level.
Note
●
The anti-fungus assembly may have powder.
This is normal and it performs without problem.
●
The anti-fungus agent will become smaller over time.
This is normal and it performs without problem.
●
The anti-fungus agent has a peculiar smell. It is not harmful.
Anti-fungus
assembly
Tray
Remove the anti-
fungus assembly,
wash with water.
●
Wipe the dirt in details with
cotton swab or toothbrush.
●
Do not remove the floater
(polystyrene foam).
→ If it comes off (P.18)
●
Stubborn stains
→ See “To remove the
stubborn stains”. (P.17)
Wash with water.
●
Stubborn stains
→
See “To remove the
stubborn stains”.
(P.17)
Shaft: thin
Shaft (rear): thick
Shaft mount:
thick
●
The filter has a “thick” and “thin” shaft.
Take care when installing it on the tray.
●
Remove while
pressing the tab.
Tab
Body / Front panel /
Tank / Tray /
Anti-fungus assembly
Before cleaning
WARNING
■
Be sure to disconnect the power plug.