Panasonic F-VXR70H, Руководство по эксплуатации

Страница: 20 / 52

20
Further information
(continued)
Manual operation
Odor House dust
Odors or smoke in the air
are sucked in efficiently
from around the entire
front panel. Use this mode
to intensively remove
odors or smoke after
cooking or smoking.
(Louver movement
B
)
House dust such as pollen
that collects on the floor is
sucked in efficiently mainly
through the bottom of the
front panel. Use this mode
when concerned about
house dust, such as hay
fever season.
(Louver movement
C
)
Automatic airflow
The product adjusts the airflow to suit the type of dirt
in the air for more efficient dust collection.
■
Air cleanliness and movement of the louvers
and front panel
The product operates by moving the louvers and front
panel to the optimum position to suit the type and
concentration of dirt.
House Purifying airflow
When operating in clean air mode with “Air volume”
set to [H (High)], the product collects dust in the air
intensively by moving the louvers.
■
Movement of the louvers and front panel
Air cleanliness
Clean
sign
Louver movement
(
A
to
E
in
right image)
Front panel
Clean Blue
A
(It swings slowly.)
Closed
Odors or smoke
detected
Red
B
Opens
frontward
House dust
detected
C
Bottom
opens
frontward
Odors or smoke and
house dust detected
D
PM 2.5 detected
E
Opens
frontward
●
When PM 2.5 and other dirt are detected at the
same time, the product moves as shown in either
B
,
C
or
D
.
●
When the air in the room is clean, the product may
remain in standby mode with the louvers closed.
Mode
Louver movement
(
A
,
C
in right image)
Front panel
Preparation mode
A
or
C
Bottom opens
frontward
Cleaning mode
■
Louver movement
●
When the “Air volume” is set to [H (High)], the
product operates with the front panel open.
●
The product operates with the front panel open for
10 minutes after starting operation.
PM 2.5 airflow
The product operations with powerful suction with
airflow suited to PM 2.5.
■
Movement of the louvers and front panel
Mode
Louver movement
(
B
in right image)
Front panel
PM 2.5
B
Opens frontward
Functions of the anti-fungus assembly
Keeps the inside of the tray clean.
Testing trustee: Boken Quality Evaluation Institute Test method: Verify the method to prevent mold bacteria (Halo method).
Anti-fungus method: Install the anti-fungus assembly to the tray. Target: Humidifying filter in the tray
Test outcome: Confirm that inhibited. [No. 09006504-1]
Type of airflow
Rear louver
Front louver
Front panel
A
C
B
D
E