36
Symptom
Please confirm the following:
It is difficult to install the tray to
the body.
●
Is the humidifying filter or the filter frame installed properly? (P.24)
→
If they are installed incorrectly, it may be difficult to install / remove
the tray to/from the body.
The humidifying indicator blinks.
●
Is the tray filled with water? (P.12)
Water is empty in “Humidifying clean air” mode.
If the tray is empty, the product will switch to “Clean air” mode.
→
To continue humidifying, fill the tray with water. (P.12)
Even if the tray is not empty, the
humidifying indicator blinks.
●
Is the tray installed properly and completely?
●
Is the product inclined?
→
Place the product on the flat and stable platform or floor.
The check indicator blinks.
●
Is the product fell down?
→
Disconnect the power plug.
Raise the product. (Wipe off the spilled water.)
Leave the product more than half a day without operation.
(Dry the interior of the product completely, if water enters inside.)
Reconnect and turn on the product.
●
Has the product been shaken, inclined, or given impact?
→
Disconnect and connect the power plug again.
●
Have magnets, metallic objects or similar objects been placed on the
product?
→
Disconnect and connect the power plug again.
Contact the dealer immediately in the following case.
Check indicator is lit and all “Air
Volume” indicators are blinking.
●
Failure has occurred.
→
Disconnect the power plug and contact the dealer for a check or
repair.
Troubleshooting
VXL40M_EN_ARA.indd 36
9/30/2015 2:58:05 PM
