18
FURTHER INFORMATION
nanoe
®
5
35
2
30
%
85
%
nanoe
®
Room temperature: about 5
35
(dew-point temperature: 2
)
Conditions for
nanoe
®
generation
Relative humidity: about 30% 85%
nanoe
®
is generated by using the air in the room. Therefore, due to the differences in temperature
and humidity nanoe
®
may not be generated stably.
When nanoe
®
is generated, small amount of ozone will be released. However, the quantity will be
far less than the level in natural environment such as forest, and not be harmful to human beings.
nanoe
®
About nanoe
®
During operation, press
and
buttons at the same time for about 3 seconds
nanoe
®
indicator lights off) Press the buttons for about 3 seconds again to restart the nanoe
®
.
(nanoe
®
cannot be set during product stops operating.)
nanoe
®
can be switched off. nanoe
®
3
nanoe
®
3
nanoe
®
nanoe
®
MAINTENANCE
When idle for a long time
Disconnect power after turning off the product. (The product still consumes power even at rest.)
Maintain the product as usual.
Filter replacement
Notice
The filter which needs to exchange cannot be used again even is cleaned, please dispose it as
non-flammable garbage.
If the product is used in a room (especially hotel) with strong odor such as aromatic smell, cigarette
smoke or barbecue smell, these odors may adhere to the filter, when the adsorption capacity of the
filter reaches saturation, odor will also be blown out again with the wind because of excess
adsorption. When there is above situation, please clean the composite and deodorizing filter. If the
situation persists, please replace composite and deodorizing filter, even if the filter replacement
indicator is off. In addition, if often used in a room with strong odor, please open the windows to
ventilate the room regularly.
3
8
After replacing the filter, record the date installed on the label that came with the filter and attach
it to the body, cover the previous date record. (Page 8 )
Connect the power, press and simultaneously for about 3 seconds, the filter replacement
indicator turns off, and the reset is completed.